TM7111PM Datasheet, PDF (1/1 Pages) API Technologies Corp – RF AMPLIFIER MODEL

RF AMPLIFIER
MODEL TM7111PM
Available as:
TM7111PM, 4 Pin TO-8 (T4)
TN7111PM, 4 Pin Surface Mount (SM3)
FP7111PM, 4 Pin Flatpack (FP4)
BX7111PM,Connectorized Housing (H1)
Features
! Superior Phase Noise Performance
! Low Noise Figure: 1.4 dB Typical
! Output Power: +17dBm Typical
! Operating Temp. -55 ºC to +85 ºC
Specifications
CHARACTERISTIC
Frequency
TYPICAL
Ta= 25 ºC
10 - 100 MHz
MIN/MAX
Ta = -55 ºC to +85 ºC
10 - 100 MHz
Gain (dB)
12.5
Power @ 1 dB
Comp. (dBm)
+17
Reverse
Isolation (dB)
-15
11.0 Min.
+15.5 Min.
-14 Max.
VSWR
In
Out
Noise Figure (dB)
<1.75:1
<1.75:1
1.4
2.0:1 Max.
2.0:1 Max.
2.0 Max.
Power Vdc
+15
+15
mA
14
15 Max.
Note: Care should always be taken to effectively ground the case of each unit.
Typical Intermodulation Performance at 25 ºC
Second Order Harmonic Intercept Point ....... +53 dBm (Typ.)
Second Order Two Tone Intercept Point ........ +47 dBm (Typ.)
Third Order Two Tone Intercept Point ............ +33 dBm (Typ.)
Maximum Ratings
Ambient Operating Temperature ................ -55ºC to +100 ºC
Storage Temperature ................................. -62ºC to +125 ºC
Case Temperature .................................................. +125 ºC
DC Voltage .......................................................... +18 Volts
Continuous RF Input Power .................................. +13 dBm
Short Term RF Input Power ...... 50 Milliwatts (1 Minute Max.)
Maximum Peak Power .................... 0.5 Watt (3 µsec Max.)
Guaranteed Phase Noise Performance (dBc/Hz)
Frequency
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
Typical
-156
-157
-158
-165
-165
Guarantee (Min.)
-152
-153
-154
-161
-161
Typical Performance Data
14
Gain (dB)
13
12
11
0
Reverse Isolation (dB)
-130
Phase Noise (dBc/Hz)
-10
-140
-20
-30
-150
10
-40
Start 10 MHz
Stop 100 MHz
Start 10 MHz
1 dB Comp. (dBm)
+19
3
-160
Stop 100 MHz
Noise Figure (dB)
-170
+18
+17
+16
-180
2
-190
100
1K
10K
100K
1M
+15
Start 10 MHz
2.0
1.5
Input VSWR
1
Stop 100 MHz
Start 10 MHz
2.0
1.5
Stop 100 MHz
Output VSWR
_________Guarantee __ __ __ __Typical
Phase Noise Test Conditions:
Carrier Frequency: 100 MHz
Power Output: +16.3 dBm
Temperature: 25 ºC
Agilent ES5500 System
1.0
Start 10 MHz
1.0
Stop 100 MHz
Start 10 MHz
Stop 100 MHz
Legend
+25 ºC
+85 ºC - - - - - - -55 ºC
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH [phone] · Fax [phone]
www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, Pennsylvania 19154 · PH [phone] · Fax [phone]