TM6162PM Datasheet, PDF (1/1 Pages) API Technologies Corp – RF AMPLIFIER MODEL

RF AMPLIFIER
MODEL TM6162PM
Available as:
TM6162PM, 4 Pin TO-8 (T4)
TN6162PM, 4 Pin Surface Mount (SM3)
FP6162PM, 4 Pin Flatpack (FP4)
BX6162PM, Connectorized Housing (H1)
Features
! Superior Phase Noise Performance
! Output Power: +16 dBm Typical
! Low Noise Figure: <1.4 dB Typical
! Operating Temp. -55 ºC to +85 ºC
! Environmental Screening Available
Specifications
CHARACTERISTIC
Frequency (MHz)
TYPICAL
Ta= 25 ºC
5 -125 MHz
MIN/MAX
Ta = -55 ºC to +85 ºC
10 - 100 MHz
Gain (dB)
Power @ 1 dB
Comp. (dBm)
Reverse
Isolation
12.7
+16.0
-15.5
11.5 Min.
+14.0 Min.
- 15 Max.
VSWR In
Out
<1.5:1
<1.5:1
2.0:1 Max.
2.0:1 Max.
Noise Figure (dB)
<1.4
2.0 Max.
Power Vdc
+15
mA
13.5
+15
16 Max.
Note: Care should always be taken to effectively ground the case of each unit.
Typical Intermodulation Performance at 25 ºC
Second Order Harmonic Intercept Point ...... +52 dBm (Typ.)
Second Order Two Tone Intercept Point ....... +46 dBm (Typ.)
Third Order Two Tone Intercept Point ........... +32 dBm (Typ.)
Maximum Ratings
Ambient Operating Temperature ................ -55ºC to +100 ºC
Storage Temperature ................................. -62ºC to +125 ºC
Case Temperature .................................................. +125 ºC
DC Voltage .......................................................... +18 Volts
Continuous RF Input Power .................................. +10 dBm
Short Term RF Input Power ............. 50 mW (1 Minute Max.)
Maximum Peak Power .................... 0.2 Watt (3 µsec Max.)
* ^{Guaranteed Phase Noise Performance (dBc/Hz)}
Frequency
Typical
Guarantee
100 Hz
-160
-156
1 kHz
-165
-162
10 kHz
-166
-163
100 kHz
-170
-167
1 MHz
-172
-168
Gain (dB)
14
Typical Performance Data
Reverse Isolation (dB)
0
-130
Phase Noise (dBc/Hz)
13
- 10
-140
12
- 20
-150
11
- 30
10
Start 5 MHz
- 40
Stop 125 MHz
Start 5 MHz
-160
Stop 125 MHz
1 dB Comp. (dBm)
Noise Figure (dB)
+18
3
-170
+17
+16
+15
-180
2
-190
100
1k
10k
+14
Start 5 MHz
2.0
Input VSWR
1
Stop 125 MHz
Start
2.0
5
MHz
Output VSWR
Stop 125 MHz
1.5
1.5
1.0
Start 5 MHz
1.0
Stop 125 MHz
Start 5 MHz
Stop 125 MHz
_________Guarantee __ __ __
Residual Phase Noise Test Conditions:
! Carrier Frequency: 80 MHz
! Power Output +16.0 dBm
! Temperature: 25 ^oC
! Agilent ES5500 System
Legend
+25 ºC
+85 ºC - - - - - - -55 ºC
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH [phone] · Fax [phone]/04
www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, Pennsylvania 19154 · PH [phone] · Fax [phone]