TM6131PM Datasheet, PDF (1/1 Pages) API Technologies Corp – RF AMPLIFIER MODEL

RF AMPLIFIER
MODEL TM6131PM
Available as:
TM6131PM, 4 Pin TO-8 (T4)
TN6131PM, 4 Pin Surface Mount (SM3)
FP6131PM, 4 Pin Flatpack (FP4)
BX6131PM, Connectorized Housing (H1)
Features
! High Third Order Intercept: +37 dBm Typical
! High Output Power: +20 dBm Typical
! Operating Temp. -55 ºC to +85 ºC
! Environmental Screening Available
Specifications
CHARACTERISTIC
Frequency
Gain (dB)
TYPICAL
Ta= 25 ºC
5 - 500 MHz
10.3
MIN/MAX
Ta = -55 ºC to +85 ºC
10 - 500 MHz
9.0 Min.
Power @ 1 dB
Comp. (dBm)
+20
Reverse
Isolation (dB)
-22
+18.0 Min.
-20 Max.
VSWR
In
Out
Noise Figure (dB)
1.25:1
1.25:1
4.5
2.0:1 Max.
2.0:1 Max.
6.5 Max.
Power Vdc
+15
+15
mA
62
70 Max.
Note: Care should always be taken to effectively ground the case of each unit.
Typical Intermodulation Performance at 25 ºC
Second Order Harmonic Intercept Point ....... +56 dBm (Typ.)
Second Order Two Tone Intercept Point ........ +50 dBm (Typ.)
Third Order Two Tone Intercept Point ............ +37 dBm (Typ.)
Maximum Ratings
Ambient Operating Temperature ................ -55ºC to +100 ºC
Storage Temperature ................................. -62ºC to +125 ºC
Case Temperature .................................................. +125 ºC
DC Voltage .......................................................... +18 Volts
Continuous RF Input Power .................................. +13 dBm
Short Term RF Input Power ...... 50 Milliwatts (1 Minute Max.)
Maximum Peak Power .................... 0.5 Watt (3 µsec Max.)
Guaranteed Phase Noise Performance (dBc/Hz)
Frequency
Typical
Guarantee
100 Hz
1 kHz
-153
-149
-172
-168
10 kHz
-173
-169
100 kHz
-177
-173
1 MHz
-177
-173
Typical Performance Data
Gain (dB)
12
Reverse Isolation (dB)
0
-120
Phase Noise (dBc/Hz)
11
- 10
-130
10
- 20
9
- 30
-140
8
Start 10 MHz
- 40
Stop 500 MHz
Start 10 MHz
-150
Stop 500 MHz
1 dB Comp. (dBm)
+22
+21
+20
+19
-160
Noise Figure (dB)
7
-170
6
5
-180
100
1K
10K
100K
1M
4
_________Guarantee __ __ __ __Typical
+18
Start 10 MHz
3
Stop 500 MHz
Start 10 MHz
Stop 500 MHz
Input VSWR
2.0
2.0
Output VSWR
1.5
1.5
* Residual Phase Noise Test Conditions
Carrier Frequency: 200 MHz
Power Output: +19 dBm
Temperature: 25 ºC
Agilent ES5500 System
1.0
Start 10 MHz
Legend
1.0
Stop 500 MHz
Start 10 MHz
+25 ºC
+85 ºC - - - - - - -55 ºC
Stop 500 MHz
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH [phone] · Fax [phone]
www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, Pennsylvania 19154 · PH [phone] · Fax [phone]