TM6121PM Datasheet, PDF (1/1 Pages) API Technologies Corp – RF AMPLIFIER MODEL

RF AMPLIFIER
MODEL TM6121PM
Available as:
TM6121PM, 4 Pin TO-8 (T4)
TN6121PM, 4 Pin Surface Mount (SM3)
FP6121PM, 4 Pin Flatpack (FP4)
BX6121PM, Connectorized Housing (H1)
Features
! Superior Phase Noise Performance
! High Third Order Intercept: +38 dBm Typical
! Low Noise Figure: <3.0 dB Typical
! Operating Temp. -55 ºC to +85 ºC
! Environmental Screening Available
Specifications
CHARACTERISTIC
TYPICAL
Ta= 25 ºC
MIN/MAX
Ta = -55 ºC to +85 ºC
Frequency
Gain (dB)
Power @ 1 dB
Comp. (dBm)
Reverse
Isolation (dB)
20 - 200 MHz
10
+20.0
- 18
20 - 200 MHz
9.4 Min.
+18.0 Min.
-17 Max.
VSWR In
Out
Noise Figure (dB)
1.75:1
1.75:1
<3.0
2.0:1 Max.
2.0:1 Max.
4.0 Max.
Power
Vdc
+15
+15
mA
60
70 Max.
Note: Care should always be taken to effectively ground the case of each unit.
Typical Intermodulation Performance at 25 ºC
Second Order Harmonic Intercept Point ...... +60 dBm (Typ.)
Second Order Two Tone Intercept Point ....... +55 dBm (Typ.)
Third Order Two Tone Intercept Point ........... +38 dBm (Typ.)
Maximum Ratings
Ambient Operating Temperature ................ -55ºC to +100 ºC
Storage Temperature ................................. -62ºC to +125 ºC
Case Temperature .................................................. +125 ºC
DC Voltage .......................................................... +18 Volts
Continuous RF Input Power .................................. +17 dBm
Short Term RF Input Power ........... 200 mW (1 Minute Max.)
Maximum Peak Power .................... 0.5 Watt (3 µsec Max.)
* ^{Guaranteed Phase Noise Performance (dBc/Hz)}
Frequency
100 Hz
1 kHz
10 kHz
100 kHz
1 MHz
Typical
-155
-169
-175
-179
-179
Guarantee (min.)
-151
-165
-171
-175
-175
Gain (dB)
12
Typical Performance Data
Reverse Isolation (dB)
-5
-130
Phase Noise (dBc/Hz)
11
- 10
-140
10
- 15
-150
9
- 20
8 _{Start 20 MHz}
Stop 200 MHz ^{- 25 Start 20 MHz}
-160
Stop 200 MHz
1 dB Comp. (dBm)
Noise Figure (dB)
+22
5
-170
+21
+20
+19
4
-180
3
-190
2
100
1K
10K
100K
1M
+18 _{Start 20 MHz}
2.0
Input VSWR
Stop 200 MHz ^{1 Start 20 MHz}
Stop 200 MHz
Output VSWR
2.0
1.5
1.5
1.0 _{Start 20 MHz}
Legend
Stop 200 MHz ^1.0 Start 20 MHz
Stop 200 MHz
+25 ºC
+85 ºC - - - - - - -55 ºC
_________Guarantee __ __ __ __Typical
Residual Phase Noise Test Conditions:
! Carrier Frequency: 160 MHz
! Power Output +20 dBm
! Temperature: 25 ^oC
! Agilent ES5500 System
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH [phone] · Fax [phone]^/04
www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, Pennsylvania 19154 · PH [phone] · Fax [phone]