TM5137PM Datasheet, PDF (1/1 Pages) API Technologies Corp – RF AMPLIFIER MODEL

RF AMPLIFIER
MODEL TM5137PM
Available as:
TM5137PM, 4 Pin TO-8 (T4)
TN5137PM, 4 Pin Surface Mount (SM3)
FP5137PM, 4 Pin Flatpack (FP4)
BX5137PM, Connectorized Housing (H1)
Features
! Superior Phase Noise Performance
! High Output Power: +22.5 dBm Typical
! High Third Order Intercept: +39 dBm Typical
! Operating Temp. -55 ºC to +85 ºC
! Environmental Screening Available
Specifications
CHARACTERISTIC
TYPICAL
Ta= 25 ºC
MIN/MAX
Ta = -55 ºC to +85 ºC
Frequency (MHz)
10 - 200 MHz
10 - 200 MHz
Gain (dB)
12.7
12.2 Min.
Power @ 1 dB
Comp. (dBm)
Reverse
Isolation (dB)
VSWR
In
+22.5
-18
<1.6:1
+20.5 Min.
- 17 Max.
2.0:1 Max.
Out
<1.75:1
2.0:1 Max.
Noise Figure (dB)
<3.5
Power Vdc
+15
mA
75
4.2 Max.
+15
80 Max.
Note: Care should always be taken to effectively ground the case of each unit.
Typical Intermodulation Performance at 25 ºC
Second Order Harmonic Intercept Point ...... +58 dBm (Typ.)
Second Order Two Tone Intercept Point ....... +53 dBm (Typ.)
Third Order Two Tone Intercept Point ........... +39 dBm (Typ.)
Maximum Ratings
Ambient Operating Temperature ................ -55ºC to +100 ºC
Storage Temperature ................................. -62ºC to +125 ºC
Case Temperature .................................................. +125 ºC
DC Voltage .......................................................... +18 Volts
Continuous RF Input Power .................................. +18 dBm
Short Term RF Input Power ........... 100 mW (1 Minute Max.)
Maximum Peak Power ................... 0.2 Watt (3 msec Max.)
* ^{Guaranteed Phase Noise Performance (dBc/Hz)}
Frequency
Typical
Guarantee (min.)
100 Hz
-165
-162
1 kHz
-170
-166
10 kHz
-175
-170
100 kHz
-178
-174
1 MHz
-178
-174
Typical Performance Data
Gain (dB)
14
0
Reverse Isolation (dB)
-130
Phase Noise (dBc/Hz)
13
- 10
-140
12
- 20
-150
11
- 30
10
Start 10
+24
MHz
Stop
1 dB Comp. (dBm)
200 MHz ^{- 40}Start
6
10
MHz _{Noise Figure (dB)}Stop
-160
200 MHz
-170
+23
+22
+21
5
4
-180
3
-190
100
1k
10k
100k
1M
+20 _{Start 10 MHz}
2.0
1.5
1.0 _{Start 10 MHz}
2
Input VSWR ^{Stop 200 MHz} _2.0 ^{Start 10 MHz} Output VSWR ^{Stop 200 MHz}
1.5
Stop 200 MHz ^1.0 Start 10 MHz
Stop 200 MHz
_________Guarantee __ __ __ __Typical
Residual Phase Noise Test Conditions:
! Carrier Frequency: 160 MHz
! Power Output +22 dBm
! Temperature: 25 ^oC
! Agilent ES5500 System
Legend
+25 ºC
+85 ºC - - - - - - -55 ºC
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH [phone] · Fax [phone]
www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, Pennsylvania 19154 · PH [phone] · Fax [phone]