English
Language : 

TM5126PM Datasheet, PDF (1/1 Pages) API Technologies Corp – RF AMPLIFIER MODEL
RF AMPLIFIER
MODEL TM5126PM
Available as:
TM5126PM, 4 Pin TO-8 (T4)
TN5126PM, 4 Pin Surface Mount (SM3)
FP5126PM, 4 Pin Flatpack (FP4)
BX5126PM, Connectorized Housing (H1)
Features
! Superior Phase Noise Performance
! Low Noise Figure: Less than 3.0 dB
! Operating Temp. -55 ºC to +85 ºC
! Environmental Screening Available
Specifications
CHARACTERISTIC
Frequency
Gain (dB)
Power @ 1 dB
Comp. (dBm)
Reverse
Isolation (dB)
TYPICAL
Ta= 25 ºC
5-500 MHz
15
17
-21
MIN/MAX
Ta = -55 ºC to +85 ºC
5-500 MHz
14 Min.
16 Min
-20 Max.
Typical Intermodulation Performance at 25 ºC
Second Order Harmonic Intercept Point ....... +48 dBm (Typ.)
Second Order Two Tone Intercept Point ........ +42 dBm (Typ.)
Third Order Two Tone Intercept Point ............ +32 dBm (Typ.)
Maximum Ratings
Ambient Operating Temperature ................ -55ºC to +100 ºC
Storage Temperature ................................. -62ºC to +125 ºC
Case Temperature .................................................. +125 ºC
DC Voltage .......................................................... +18 Volts
Continuous RF Input Power .................................. +13 dBm
Short Term RF Input Power ...... 50 Milliwatts (1 Minute Max.)
Maximum Peak Power .................... 0.5 Watt (3 µsec Max.)
Note: Care should always be taken to effectively ground the case of each unit.
Guaranteed Phase Noise Performance (dBc/Hz)
Frequency
Typical
Guarantee
VSWR
In
<1.5:1
2.0:1 Max.
100 Hz
-165
-161
Out
Noise Figure (dB)
<1.5:1
<3.0
2.0:1 Max.
3.5 Max.
1 kHz
10 kHz
-172
-168
-173
-169
Power
Vdc
+15
+15
100 kHz
-174
-170
mA
50
55 Max.
1 MHz
-174
-170
Typical Performance Data
Gain (dB)
17
Reverse Isolation (dB)
0
-130
16
15
14
13
Start 5 MHz
1 dB Comp. (dBm)
+20
+19
- 10
-140
- 20
-150
- 30
Stop 500 MHz
- 40
-160
Start 5 MHz
Stop 500 MHz
Noise Figure (dB)
-170
5
-180
4
+18
+17
+16
Start 5 MHz
2.0
1.5
3
-190100
1k
10k
100k
1M
2
_______Guarantee __ __ __ Typical
1
Input VSWR
Stop 500 MHz
Start 5 MHz
2.0
1.5
Output VSWR
Stop 500 MHz
* Residual Phase Noise Test Conditions:
! Carrier Frequency: 200 MHz
! Power Output: +17.0dBm
! Temperature: 25 ºC
! Agilent ES5500 System
1.0
Start 5 MHz
1.0
Stop 500 MHz
Start 5 MHz
Legend
Stop 500 MHz
+25 ºC
+85 ºC - - - - - - -55 ºC
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH (888) 553-7531 · Fax (888) 553-7532 06/18/04
www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, Pennsylvania 19154 · PH (215) 464-4000 · Fax (215) 464-4001