TM5125PM Datasheet, PDF (1/1 Pages) API Technologies Corp – RF AMPLIFIER MODEL

RF AMPLIFIER
MODEL TM5125PM
Available as: TM5125PM, 4 Pin TO-8 (T4)
TN5125PM, 4 Pin Surface Mount (SM3)
BX5125PM, Connectorized Housing (H1)
Features
! High Gain: 20.5 dB Typical
! High Power: +24 dBm Typical
! Low Noise: 2.0 dB Typical
! Operating Temp. -55 ºC to +85 ºC
! Environmental Screening Available
Specifications
CHARACTERISTIC
Frequency
Gain (dB)
Power @ 1 dB
Comp. (dBm)
Reverse
Isolation (dB)
TYPICAL
Ta= 25 ºC
5 - 125 MHz
20.5
+24.0
-24
MIN/MAX
Ta = -55 ºC to +85 ºC
. ^{10 - 100 MHz}
19.5 Min/21 Max.
+22.5 Min.
-23 Max.
Typical Intermodulation Performance at 25 ºC
Second Order Harmonic Intercept Point ....... +58 dBm (Typ.)
Second Order Two Tone Intercept Point ........ +52 dBm (Typ.)
Third Order Two Tone Intercept Point ............ +40 dBm (Typ.)
Maximum Ratings
Ambient Operating Temperature ................ -55ºC to +100 ºC
Storage Temperature ................................. -62ºC to +125 ºC
Case Temperature .................................................. +125 ºC
DC Voltage .......................................................... +18 Volts
Continuous RF Input Power .................................. +13 dBm
Short Term RF Input Power ............. 50 mW (1 Minute Max.)
Maximum Peak Power .................... 0.5 Watt (3 µsec Max.)
* ^{Guaranteed Phase Noise Performance (dBc/Hz)}
VSWR
In
Out
Noise Figure (dB)
1.7:1
1.35:1
2.0
2.0:1 Max.
2.0:1 Max.
3.0 Max.
Frequency
100 Hz
1 kHz
Power
Vdc
+15
mA
80
+15
90 Max.
Note: Care should always be taken to effectively ground the case of each unit.
10 kHz
100 kHz
1 MHz
Gain (dB)
22
Typical Performance Data
Reverse Isolation (dB)
0
-130
Typical
- 162
- 175
- 176
- 176
- 176
Guarantee (min.)
-158
-172
-174
-174
-174
Phase Noise (dBc/Hz)
21
-10
-140
20
- 20
19
- 30
-150
18 _{Start 10 MHz}
Stop 100 MHz ^{- 40} Start 10 MHz
Stop 100 MHz -160
1 dB Comp. (dBm)
Noise Figure (dB)
+26
3
-170
+25
+24
2
+23
-180
-190
100
1k
10k
100k
1M
+22 _{Start 10 MHz}
Input VSWR
2.0
1.5
1.0 _{Start 10 MHz}
Stop 100 MHz ^{1 Start 10 MHz}
Stop 100 MHz
Output VSWR
2.0
1.5
Stop 100 MHz 1.0 Start 10 MHz
Stop 100 MHz
______Guarantee __ __ __Typical
*^{Phase Noise Test Conditions:}
! _{Carrier Frequency: 80 mHz}
! _{Power Output: +24 dBm}
! _{Temperature: 25 ºC}
! _{Agilent ES5500 System}
Legend
+25 ºC
+85 ºC - - - - - - -55 ºC
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH [phone] · Fax [phone]^/03
www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, Pennsylvania 19154 · PH [phone] · Fax [phone]