TM3041PM Datasheet, PDF (1/1 Pages) API Technologies Corp – RF AMPLIFIER MODEL

RF AMPLIFIER
MODEL TM3041PM
Available as:
TM3041PM, 4 Pin TO-8 (T4)
TN3041PM, 4 Pin Surface Mount (SM3)
FP3041PM, 4 Pin Flatpack (FP4)
BX3041PM, Connectorized Housing (H1)
Features
 Superior Phase Noise Performance
 High Output Power: +24 dBm Typical
 Operating Temp. -55 ºC to +85 ºC
 Environmental Screening Available
Typical Intermodulation Performance at 25 ºC
Second Order Harmonic Intercept Point ...... +55 dBm (Typ.)
Second Order Two Tone Intercept Point ....... +50 dBm (Typ.)
Third Order Two Tone Intercept Point ........... +38 dBm (Typ.)
Maximum (No Damage) Ratings
Specifications
CHARACTERISTIC
TYPICAL
Ta= 25 ºC
MIN/MAX
Ta = -55 ºC to +85 ºC
Ambient Operating Temperature ................ -55ºC to +100 ºC
Storage Temperature ................................. -62ºC to +125 ºC
Case Temperature .................................................. +125 ºC
DC Voltage .......................................................... +18 Volts
Frequency (MHz)
10 - 300 MHz
10 - 300 MHz
Continuous RF Input Power .................................. +13 dBm
Gain (dB)
16.5
15.5 Min.
Short Term RF Input Power ............. 50 mW (1 Minute Max.)
Power @ 1 dB
Maximum Peak Power .................... 0.5 Watt (3 μsec Max.)
Comp. (dBm)
Reverse Isolation (dB)
VSWR
In
+24.0
- 20
1.80:1
+23.0 Min.
-19 Max.
2.0:1 Max.
* ^{Guaranteed Phase Noise Performance (dBc/Hz)}
Frequency
Typical
Guarantee
Out
1.80:1
2.0:1 Max.
100 Hz
-160
-155
Noise Figure (dB)
2.8
4.0 Max.
1 kHz
-175
-170
Power Vdc
+15
+15
10 kHz
-175
-170
mA
80
85 Max.
100 kHz
-175
-170
Note: Care should always be taken to effectively ground the case of each unit.
Revision 4/25/2012
1 MHz
-175
-170
*Phase Noise Performance is Measured and Guaranteed at 300 MHz at 25C.
Typical Performance Data
Gain (dB)
18
Reverse Isolation (dB)
-0
-130
Phase Noise (dBc/Hz)
17
-10
-140
16
-20
-150
15
-30
14 _{Start 10 MHz}
Stop 300 MHz ^-40Start 10 MHz
-160
Stop 300 MHz
1 dB Comp. (dBm)
+25
4
Noise Figure (dB)
-170
+24
+23
+22
+21_{Start 10 MHz}
2.0
1.6
1.2 _{Start 10 MHz}
Input VSWR
3.5
3
2.5
2
Stop 300 MHz Start 10 MHz
2.0
1.5
Stop 300 MHz ^1.0Start 10 MHz
-180
-190
100
1k
10k
100k
1M
Stop 300 MHz
_________Guarantee __ __ __ __Typical
Output VSWR
Residual Phase Noise Test Conditions:
 Carrier Frequency: 300 MHz
 Power Output +21.0 dBm
 Temperature: 25 ^oC
 Agilent ES5500 System
Stop 300 MHz
Legend
+25 ºC
+85 ºC - - - - - - -55 ºC
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, Florida 32905 · PH [phone] · Fax [phone]
www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, Pennsylvania 19154 · PH [phone] · Fax [phone]