SCI-9925-153 Datasheet, PDF (1/1 Pages) API Technologies Corp – Hole must be free of all insulating materials

Spec Mini-Press
9925 Series
This new knurled filter is designed to be pressed
into place and create a reliable mechanical bond. This
feature makes it an excellent selection for applications
where soldering is undesirable. Suitable plating is
available that allows gold bonding to the terminals.
Applications
These filters are ideal for microwave and RF applica-
tions such as attenuators, synthesizers, and oscillators.
They perform well in high impedance circuits where
large capacitance values are not practical.
Installation
s .136" to .137" (3.45-3.48mm) diameter hole
s Hole must be free of all insulating materials.
s Installation tool must have a hole of sufficient depth
and diameter to accept the terminal of the filter.
s Installation force must be applied gradually and
smoothly until the flange of the filter is seated against
the receiving part (request installation instructions).
Mechanical Specifications
Installation . . . . . . . . . . . . . Press-in
Plating . . . . . . . . . . . . . . . . Gold
Seal . . . . . . . . . . . . . . . . . . Glass sealed on one end,
. . . . . . . . . . . . . . . . . . . . . resin sealed on the other end
Termination Options . . . . . . Plating suitable for gold
. . . . . . . . . . . . . . . . . . . . . bonding
Operating Temperature . . . . -55°C to +125°C
Circuit Schematic
Input
Output
.030
( .002
dia.
.625 (15.88) ref.
.025
(0.635)
.010
( .002
(.254
(.051)
.250
( .030
(6.35
(.762)
.156
( .005
dia.
(3.96
( .127
dia.)
.143 ( .002
(3.63 ( .051)
(.762
.020
( .051
( .005
dia.)
(.508
Epoxy ^(.127)
Seal
.110
(.005
(2.79
(.127)
Glass Seal End
Straight Knurl,
160 D.P.
.128 ( .005
dia.
(3.25 ( .127
dia.)
Built and tested in accordance with MIL-F-15733.
Figure 1
Dimensions in inches (mm)
Insertion Tool
Part Number: SCI-9925-200
Ground
Part Number
¦ SCI-9925-153
¦ SCI-9925-303
¦ SCI-9925-502
¦ SCI-9925-000
¦ SCI-9925-101
¦ SCI-9925-501
¦ SCI-9925-122
SCI-9925-272
Rated Voltage
Minimum Insertion Loss (dB)
125°C
I
1
10
30
100 300
1
10
Figure
DC
Amp
Cap
MHz MHz MHz MHz MHz GHz GHz
1
50
5 0.015 µF +100%/-0% 7
25
30
40
40
60
60
1
50
5 0.030 µF +100%/-0% 10
30
35
45
50
55
55
1
100
5 5000 pF +100%/-0% —
15
20
30
35
45
55
1
200
5
10 pF max.
—
—
—
—
—
10
10
1
200
5 100 pF +100%/-0% —
—
—
3
10
20
28
1
200
5 500 pF +100%/-0% —
—
—
15
22
35
40
1
200
5 1200 pF +100%/-0% —
5
10
20
28
35
45
1
200
5 2700 pF +100%/-0% —
10
18
25
33
40
50
¦ Also available through API’s authorized distributors.
Note: Parts are RoHS Compliant
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: [phone] • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: [phone] • Fax: [phone]
LP11