MC2XMS-1 Datasheet, PDF (1/1 Pages) API Technologies Corp – Double Balanced Downconverter

Double Balanced Downconverter
Model MC2xMS-1
Communications Band
Electrical Specifications:⁽¹⁾
Parameter
SSB Conversion loss:^{(2) (3)}
Isolation LO to RF:
Isolation LO to IF:
Conditions
RF (GHz) LO (GHz) IF (MHz)
3.6-4.3
4.7-5.4 400-1500
4.7-5.4
4.7-5.4
Isolation RF to IF:
3.6-4.3
Input 1-dB
Compression Point:
3.6-4.3
4.7-5.4
400-1500
Input Third Order
Intercept Point:
3.6-4.3 3.5-5.4
400-1500
LO Power: ⁽⁴⁾
3.6-4.3
3.5-5.4 400-1500
RF 3.6 to 4.3 GHz
Specifications
Model MC2xMS-1
Min Typical
5.5 dB
35 dB
30 dB
23 dB
Max
7.0 dB
LO Power
3 = +7 dBm
4 = +10 dBm
5 = +13 dBm
+1 dBm
+4 dBm
+8 dBm
MC23MS-1
MC24MS-1
MC25MS-1
+11 dBm
+14 dBm
+18 dBm
MC23MS-1
MC24MS-1
MC25MS-1
+7 dBm
+10 dBm
+13 dBm
MC23MS-1
MC24MS-1
MC25MS-1
Notes:
1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25 C with the
nominal LO power. Specifications indicated as typical are not guaranteed.
2. Noise figure is typically within ±0.5 dB of conversion loss if IF frequencies greater than 10 MHz.
3. Conversion loss typically degrades less than 0.5 dB at +100 C and improves less than 0.5 dB at -55 C.
4. Usable LO drives are up to 2 dB below and 3 dB above nominal.
5. See Application note M112, for aid in selecting the outline and for mounting and installation information.
MC2xMS-1
Outline: MS2T
Typical
Performance
at 25˚C
Convertion Loss (1.1 GHz IF) dB
LO-IF
LO-RF
3.6
4.3
4.7
5.4
4.7
5.4
3.6
4.3
All dimensions are in inches and [mm].
3.6
4.3
0.4
1.5
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH [phone] · Fax [phone]
Rev.
1/11/07
www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH [phone] · Fax [phone]