M73T Datasheet, PDF (1/1 Pages) Spectrum Microwave, Inc. – Double Balanced Mixer

Double Balanced Mixer
Model M73T
RF Band
RF 0.8 to 2.4 GHz
Electrical Specifications : ⁽¹⁾
Parameter
SSB Conversion loss:⁽²⁾
Isolation
LO to RF:
LO to IF:
Input 1 dB
Compression Point:
Desensitization Point:
(RF2 @ -1 dBm)
Conditions
RF (GHz) LO (GHz) IF (GHz)
0.8-2.4
0.8-3.5
DC-1.5
Specifications
Min Typical Max
9.0 dB 10.5 dB
0.8-2.0
2.0-3.5
0.8-3.5
25 dB
20 dB
18 dB
36 dB
30 dB
21 dB
0.8-2.4
0.8-2.4
0.8-3.5
0.8-3.5
DC-1.5
DC-1.5
+0 dBm
+1.0 dBm
Input Third Order
Intercept Point:
LO Power: ⁽³⁾
0.8-2.4
0.8-3.5
0.8-3.5
DC-1.5
+10 dBm
+7 dBm
Notes:
1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with +7dBm LO
power.
Specifications indicated as typical are not guaranteed.
2. SSB Noise figure is nominally within ±0.5 dB of the SSB conversion loss for IF frequencies greater than 10 MHz.
3. Usable LO drives are up to 2 dB below and 3 dB above nominal.
Typical Performance
at 25˚C
M73T
Outline: A
All dimensions are in inches and [mm].
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH [phone] · Fax [phone]
www.SpectrumMicrowave.com ^{Spectrum Microwave · 2707 Black Lake Place · Philadelphia, PA 19154 · PH [phone] · Fax [phone]}
Rev.
2/26/09