M6XT Datasheet, PDF (1/1 Pages) Spectrum Microwave, Inc. – Double Balanced Mixer

Double Balanced Mixer
RF Band
Model M6xT
RF 1.0 to 2.0 GHz
Electrical Specifications : ⁽¹⁾
Parameter
SSB Conversion loss:⁽²⁾
Isolation
LO to RF:
LO to IF:
Input 1 dB
Compression Point:
Desensitization Point:
Input Third Order
Intercept Point:
LO Power: ⁽³⁾
Conditions
RF(GHz) LO(GHz) IF(GHz)
1.0-2.0
1.0-2.0 DC-1.0
Specifications
Min Typical Max
8.0 dB
9.0 dB
1.0-2.0
1.0-2.0
1.0-2.0
1.0-2.0
1.0-2.0
1.0-2.0
1.0-2.0
1.0-2.0
1.0-2.0
1.0-2.0
DC-1.0
DC-1.0
DC-1.0
DC-1.0
30 dB 38 dB
20 dB 25 dB
+3 dBm M63
+5 dBm M66
+15 dBm M67
+1 dBm M63
+3 dBm M66
+13 dBm M67
+13 dBm M63
+15 dBm M66
+26 dBm M67
+7 dBm M63
+13 dBm M66
+23 dBm M67
Model M6xT
LO Power
3 = +7 dBm
6 = +13 dBm
7 = +23 dBm
Notes:
1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the
nominal LO power. Specifications indicated as typical are not guaranteed.
2. SSB Noise figure is nominally within ±0.5 dB of the SSB conversion loss for IF frequencies greater than 10 MHz.
3. Usable LO drives are up to 2 dB below and 3 dB above nominal.
Typical Performance at 25˚C
M6xT
Outline: TO-8
SPECTRUM
All dimensions are in inches and [mm].
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH [phone] · Fax [phone]
www.SpectrumMicrowave.com ^{Spectrum Microwave · 2707 Black Lake Place · Philadelphia, PA 19154 · PH [phone] · Fax [phone]}