DDF6311 Datasheet, PDF (1/1 Pages) API Technologies Corp – FIVE & SIX CHANNEL HIGH SPEED DRIVERS

FIVE & SIX CHANNEL
HIGH SPEED DRIVERS
DDF5311
DDF6311
Independent high speed drivers with 300 mA peak
current spikes.
1. Inputs are non-inverting when Mode control has a
logic high input.
2. Inputs are inverting when Mode control has a logic
low input.
3. To increase switching spike currents, add a capacitor
of up to 560 pF between the output and TP pins.
4. Mode control and input pins are interchangeable
within any one channel.
5. When driving anode-grounded diodes, excessive
power dissipation must be avoided. Vgg should
be limited to -8 V with -5 V recommended.
6. These drivers do not have a true current source
output. Instead the output is connected to a 380-ohm
resistor in parallel with a 560 pF capacitor and the
driven end of this RC combination is switched
between +4 V and Vee so that the negative output
current varies directly with Vee.
METAL WELDED PACKAGE
Ground
Input #1
M ode Control #1
Input #2
M ode Control #2
Input #3
M ode Control #3
Input #4
M ode Control #4
Input #5
M ode Control #5
Input #6
M ode Control #6
Ground
0.500 min
0.770 sq. (max)
DDF5311/6311
XXXX
0.075 max
0.075 max
Output #1
TP1
TP2
Output #2
Output #3
TP3
+5V
TP4
Output #4
Output #5
TP5
TP6
Output #6
-12V
0.015 ± 0.003 typ
0.050 typ
.010 ± .002
Pkg
Bottom
.150 max
0.067 typ
Spectrum Microwave
Tel: [phone] Fax: [phone]
165 Cedar Hill Street, Marlborough, Ma 01752
www.SpectrumMicrowave.com