BXMF1020 Datasheet, PDF (1/1 Pages) API Technologies Corp – Switched Multi-Channel Amplifi er

Switched Multi-Channel Amplifier
2000-8000 MHz
Model BXMF1020
FEATURES
• Phase Matched
• Amplitude Matched
• Built-in Input Drive Protection
• High Channel to Channel Isolation
• 4 Channel Design
Spectrum Microwave offers state-of-the-art multi-channel amplifiers used in demanding military frequency calibration systems. These 2,
3, and 4 channel modules are all phase matched, amplitude matched and offer both single and multiple path logic. These units allow the
engineer to either distribute an amplified signal to multiple ports, or measure the amplified output from up to 4 auxiliary ports.
Parameter
Typical
Min./Max.
Frequency Range
2000 to 8000 MHz
2000 to 8000 MHz
Receive Gain
13 dB
-
CAL Path Gain
21 dB
-
Noise Figure
9 dB
-
1 dB Compression
+9 dBm
-
Single-Tone Spurious Free Dynamic Range
45 dB
-
Phase Tracking Delta (Electrical Degrees)
12^o at any frequency
-
Amplitude Tracking (Channel to Channel) 2 dB Variation Between Channels
-
Out Of Band Rejection
30 dB
-
Reverse Isolation
40 dB
-
Channel to Channel Isolation
60 dB
-
Switching Speed (50% TTL to 90% / 10% RF)
200 nsec
-
VSWR
2.0:1
-
Switching Isolation (ON to OFF)
50 dB
-
DC Power
+6.5v / 525 mA, +3.3v / 250 mA, -15v / 50
Housing Size
5.0 “ x 3.0 “ x 0.65 “
RF Connectors
Field Replaceable SMA Connectors
Operating Case Temp. (Min./Max. Values)
-40°C to +85°C
Maximum (No Damage) Ratings
Storage Temperature
Operating Temperature
DC Voltage @ 25°C
Input Drive @ 25°C
-65°C to +125°C
-55°C to +100°C
+/- 20 VDC
+20 dBm
Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: [phone] • Email: [e-mail] • www.SpectrumMicrowave.com