BXMF1019 Datasheet, PDF (1/1 Pages) API Technologies Corp – Switched Multi-Channel Amplifi er

Switched Multi-Channel Amplifier
500-2000 MHz
Model BXMF1019
FEATURES
• Phase Matched
• Amplitude Matched
• Built-in Input Drive Protection
• High Channel to Channel Isolation
• 2 Channel Design
Spectrum Microwave offers state-of-the-art multi-channel amplifiers used in demanding military frequency calibration systems. These 2,
3, and 4 channel modules are all phase matched, amplitude matched and offer both single and multiple path logic. These units allow the
engineer to either distribute an amplified signal to multiple ports, or measure the amplified output from up to 4 auxiliary ports.
Parameter
Frequency Range
Receive Gain
CAL Path Gain
Noise Figure
1 dB Compression
Single-Tone Spurious Free Dynamic Range
Phase Tracking Delta (Electrical Degrees)
Amplitude Tracking (Channel to Channel)
Out Of Band Rejection
Reverse Isolation
Channel to Channel Isolation
Switching Speed (50% TTL to 90% / 10% RF)
VSWR
Switching Isolation (ON to OFF)
DC Power
Housing Size
RF Connectors
Operating Case Temp. (Min./Max. Values)
Typical
Min./Max.
500 to 2000 MHz
500 to 2000 MHz
16 dB
-
10 dB
-
8 dB
-
+10 dBm
-
45 dB
-
12^o at any frequency
-
2 dB Variation Between Channels
-
30 dB
-
40 dB
-
60 dB
-
200 nsec
-
2.0:1
-
50 dB
-
+6.5v / 250 mA, -15v / 50 mA
4.5 “ x 2.5 “ x 0.65 “
Field Replaceable SMA Connectors
-40°C to +85°C
Maximum (No Damage) Ratings
Storage Temperature
Operating Temperature
DC Voltage @ 25°C
Input Drive @ 25°C
-65°C to +125°C
-55°C to +100°C
+/-18 VDC
+20 dBm
Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: [phone] • Email: [e-mail] • www.SpectrumMicrowave.com