BXMF1018 Datasheet, PDF (1/1 Pages) API Technologies Corp – Frequency Multiplier (x2 to x48)

Frequency Multiplier (x2 to x48)
Model BXMF1018 (200 - 225 MHz)
Features
• Fully Customizable Housing
• Fast 90 nsec Switching Speed
• High Output +10 dBm Drive Level
• 2 Programmable Outputs
• Null Output Mode
• x2 through x48 Multiplication
Description
This Multiplier provides the system designer with a com-
pact, fast-switching building block for LO multiplication
applications. An internal solid-state multiplier provides fre-
quency multiplication by your choice of a factor of 2, 4, 8,
or up to 48, all from a single input frequency.
The multiplier is designed for airborne applications and has
field-replaceable RF connectors. The entire assembly is
designed to be slid into a channel for systems installation
without the need to solder wires or screw on connectors.
This design incorporates single-stage active doublers,
amplifiers, SRD multipliers, power splitters, bandpass filter-
ing, voltage conditioning, and BIT circuits and provides
excellent phase noise performance.
Applications
• Synthesizer Building Block
• SIGINT
• ELINT
• EW
Typical Specifications
Input Frequency
200 to 225 MHz
Input Level
+10 dBm
Output Frequency
400 MHz to 10.8 GHz
Output Level
+10 dBm
Bandwidth
2%
Switching Speed
90 nsec
Harmonics
-60 dBc
DC Power
+28 V @ 275 mA
Temp Range
+15 V @ 75 mA
0oC to +75oC
All specifications above measured at 25 ^oC
Dimensions and Connections
12” L x 13” W x 1” H
Revision 7/5/2012
Spectrum Microwave, Inc. • P: 888.553.7531 • F: 888.553.7532
E-mail: salesSpectrumsMicrowave.com • www.SpectrumMicrowave.com