BXHF1075 Datasheet, PDF (1/1 Pages) API Technologies Corp – 43 GHz to 44 GHz Microwave Amplifier

Model BXHF1075
43 GHz to 44 GHz Microwave Amplifier
Features
• Millimeterwave Operation
• Laser Sealed Housing
• Internal Voltage Regulator
• Dual Stage Amplifier
The Model BXHF1075 is standard high frequency amplifier covering 43 GHz to 44 GHz. This two stage design, utilizes
a laser sealed housing for the ultimate in environmental protection. This standard design may also be ordered in a
screened MIL-STD-883 version as a model SXHF1075. All specification ratings are based on measurements in a 50 ohm
system with a DC supply voltage tolerance of +/- 2%.
Technical Specifications
Parameter
Frequency Range
Gain
Gain Flatness
Input VSWR
Output VSWR
Output Power at 1 dB
Compression
Output 3rd Order Output
Intercept Point
Output 2nd Order Output
Intercept Point
Noise Figure
Supply Voltage
Supply Current
RF Connectors
Typical
43 GHz to 44 GHz
31 dB
+/- 1.0 dB
2.0:1
2.0:1
+17 dBm
Min. / Max.
43 GHz to 44 GHz
28 dB Min.
+/- 2.0 dB Max.
2.2:1 Max.
2.2:1 Max.
+15 dBm Min.
+27 dBm
N/A
+37 dBm
N/A
5.0 dB
5.5 dB Max.
+12 volts to +15 volts
+12 volts to +15 volts
300 mA
325 mA Max.
2.4 mm Female Replaceable Connectors
Typical values are measured at 25°C but not guaranteed.
Revision: 7/10/2013
Outline Drawing
Minimum (No Damage) Results
Storage Temperature
Operating Temperature (Case)
DC Voltage @ 25°C
Input Drive @ 25°C (CW)
-55°C to +85°C
-40°C to +85°C
+18 VDC
-5 dBm
+1 888.553.7531
[e-mail]
micro.apitech.com
www.apitech.com
Rev: 09/20/13