|
BXHF1068 Datasheet, PDF (1/2 Pages) API Technologies Corp – Microwave Amplifi er | |||
|
FEATURES
⢠Output Power @ 1dB Comp.: +28 dBm
⢠Reverse Bias Protection
⢠Input Voltage Regulator
⢠Laser Sealed Housing
⢠Input RF Surge Protection
Microwave Ampliï¬er
19 GHz to 27 GHz
Model BXHF1068
The Model BXHF1068 is standard high frequency ampliï¬er covering 19 GHz to 27 GHz. This three stage design, utilizes an
input voltage regulator to protect against ï¬uctuations in supply voltage, reverse bias protection circuitry, and a laser sealed
housing for the ultimate in environmental protection. This standard design may also be ordered in a screened MIL-STD-883
version as a model SXHF1068. All speciï¬cation ratings are based on measurements in a 50 ohm system with a DC supply
voltage tolerance of +/- 2%.
Parameter
Typical
Min. / Max.
Frequency Range
Gain
.P @ 1 dB Compression
out
19 GHz to 27 GHz
45 dB
+28 dBm
19 GHz to 27 GHz
43 dB
+27 dBm
Input VSWR
Output VSWR
1.5:1
1.5:1
2.0:1 Max.
2.0:1 Max.
3rd Order Output Intercept Point
+36 dBm
-
2nd Order Output Intercept Point
+46 dBm
-
Noise Figure
Supply Voltage
Supply Current
4.5 dB
+12 to +15 volts
800 mA
6.0 dB
+12 to +15 volts
850 mA Max.
Revision: 12/10/2012
Housing Size
RF Connectors
Operating Case Temp. (Min./Max. Values)
Typical values are measured at 25°C but not guaranteed.
1.970" L x 0.890" W x 0.290" H
Gold Plated Pins or SMA Female
-20°C to +70°C
Maximum (No Damage) Ratings
Storage Temperature
Operating Temperature (Case)
DC Voltage @ 25°C
Input Drive @ 25°C (CW)
-65°C to +125°C
-40°C to +85°C
+17 VDC
+20 dBm
Spectrum Microwave, Inc. ⢠PH: 888.553.7531 ⢠Fax: 888.553.7532 ⢠Email: sales@SpectrumMicrowave.com ⢠www.SpectrumMicrowave.com
|
▷ |