BXHF1066 Datasheet, PDF (1/2 Pages) API Technologies Corp – Microwave Amplifi er

FEATURES
• Output Power @ 1dB Comp.: +19 dBm
• Reverse Bias Protection
• Input Voltage Regulator
• Laser Sealed Housing
• Input RF Surge Protection
Microwave Amplifier
6 GHz to 12 GHz
Model BXHF1066
The Model BXHF1066 is standard high frequency amplifier covering 6 GHz to 12 GHz. This two stage design, utilizes an
input voltage regulator to protect against fluctuations in supply voltage, reverse bias protection circuitry, and a laser sealed
housing for the ultimate in environmental protection. This standard design may also be ordered in a screened MIL-STD-883
version as a model SXHF1066. All specification ratings are based on measurements in a 50 ohm system with a DC supply
voltage tolerance of +/- 2%.
Parameter
Typical
Min. / Max.
Frequency Range
Gain
P_out @ 1 dB Compression
6 GHz to 12 GHz
20 dB
+19 dBm
6 GHz to 12 GHz
19 dB
+18 dBm
Input VSWR
Output VSWR
1.5:1
1.5:1
2.0:1 Max.
2.0:1 Max.
3rd Order Output Intercept Point
+30 dBm
-
2nd Order Output Intercept Point
+40 dBm
-
Noise Figure
Supply Voltage
Supply Current
7.0 dB
+5 volts
125 mA
8.0 dB
+5 volts
140 mA Max.
Revision: 12/16/2013
Housing Size
RF Connectors
Operating Case Temp. (Min./Max. Values)
Typical values are measured at 25°C but not guaranteed.
1.500” L x 1.060” W x 0.300” H
Gold Plated Pins or SMA Female
-20°C to +70°C
Maximum (No Damage) Ratings
Storage Temperature
Operating Temperature (Case)
DC Voltage @ 25°C
Input Drive @ 25°C (CW)
-65°C to +125°C
-40°C to +85°C
+7 VDC
+20 dBm
Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: [phone] • Email: [e-mail] • www.SpectrumMicrowave.com