BXHF1062 Datasheet, PDF (1/2 Pages) API Technologies Corp – Microwave Amplifi er

FEATURES
• Output Power @ 1dB Comp.: +19 dBm
• Reverse Bias Protection
• Laser Sealed Housing
• Input RF Surge Protection
Microwave Amplifier
6 GHz to 10 GHz
Model BXHF1062
The Model BXHF1062 is standard high frequency amplifier covering 6 GHz to 10 GHz. This two stage design, utilizes input
RF surge protection to protect against power fluctuations on incoming signal, reverse bias protection circuitry, and a laser
sealed housing for the ultimate in environmental protection. This standard design may also be ordered in a screened MIL-
STD-883 version as a model SXHF1062. All specification ratings are based on measurements in a 50 ohm system with a
DC supply voltage tolerance of +/- 2%.
Parameter
Typical
Min. / Max.
Frequency Range
Gain
6 GHz to 10 GHz
20 dB
6 GHz to 10 GHz
19 dB
P_out @ 1 dB Compression
Input VSWR
Output VSWR
+19 dBm
1.5:1
1.5:1
+18 dBm
2.0:1 Max.
2.0:1 Max.
3rd Order Output Intercept Point
+31 dBm
-
2nd Order Output Intercept Point
+41 dBm
-
Noise Figure
Supply Voltage
Supply Current
6.5 dB
+5 volts
120 mA
7.5 dB
+5 volts
140 mA Max.
Revision: 12/11/2013
Housing Size
RF Connectors
Operating Case Temp. (Min./Max. Values)
Typical values are measured at 25°C but not guaranteed.
1.060” L x 0.870” W x 0.360” H
Gold Plated Pins or SMA Female
-20°C to +70°C
Maximum (No Damage) Ratings
Storage Temperature
Operating Temperature (Case)
DC Voltage @ 25°C
Input Drive @ 25°C (CW)
-65°C to +125°C
-40°C to +85°C
+7 VDC
+20 dBm
Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: [phone] • Email: [e-mail] • www.SpectrumMicrowave.com