BXHF1060 Datasheet, PDF (1/2 Pages) API Technologies Corp – Microwave Amplifi er

FEATURES
• Output Power @ 1dB Comp.: +20 dBm
• Reverse Bias Protection
• Input Voltage Regulator
• Laser Sealed Housing
• Input RF Surge Protection
Microwave Amplifier
4000 to 8000 MHz
Model BXHF 1060
The Model BXHF1060 is standard high frequency amplifier covering 4000 MHz to 8000 MHz. This three stage design,
utilizes an input voltage regulator to protect against fluctuations in supply voltage, reverse bias protection circuitry, and a
laser sealed housing for the ultimate in environmental protection. This standard design may also be ordered in a screened
MIL-STD-883 version as a model SXHF1060. All specification ratings are based on measurements in a 50 ohm system with
a DC supply voltage tolerance of +/- 2%.
Parameter
Typical
Min. / Max.
Frequency Range
Gain
P @ 1 dB Compression
out
4000 to 8000 MHz
40 dB
+20 dBm
4000 to 8000 MHz
39 dB
+19 dBm
Input VSWR
Output VSWR
1.5:1
1.5:1
2.0:1 Max.
2.0:1 Max.
3rd Order Output Intercept Point
+25 dBm
-
2nd Order Output Intercept Point
+35 dBm
-
Noise Figure
Supply Voltage
Supply Current
1.8 dB
+12 to +15 volts
220 mA
2.5 dB
+12 to +15 volts
235 mA Max.
Revision: 12/14/2012
Housing Size
RF Connectors
Operating Case Temp. (Min./Max. Values)
Typical values are measured at 25°C but not guaranteed.
1.360" L x 0.660" W x 0.360" H
Gold Plated Pins or SMA Female
-20°C to +70°C
Maximum (No Damage) Ratings
Storage Temperature
Operating Temperature (Case)
DC Voltage @ 25°C
Input Drive @ 25°C (CW)
-65°C to +125°C
-40°C to +85°C
+17 VDC
+20 dBm
Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: [phone] • Email: [e-mail] • www.SpectrumMicrowave.com