|
BXHF1059 Datasheet, PDF (1/2 Pages) API Technologies Corp – Microwave Amplifi er | |||
|
FEATURES
⢠Output Power @ 1dB Comp.: +16 dBm
⢠Reverse Bias Protection
⢠Laser Sealed Housing
⢠Input RF Surge Protection
Microwave Ampliï¬er
2000 to 8000 MHz
Model BXHF1059
The Model BXHF1059 is standard high frequency ampliï¬er covering 2000 MHz to 8000 MHz. This three stage design,
utilizes an input voltage regulator to protect against ï¬uctuations in supply voltage, reverse bias protection circuitry, and a
laser sealed housing for the ultimate in environmental protection. This standard design may also be ordered in a screened
MIL-STD-883 version as a model SXHF1059. All speciï¬cation ratings are based on measurements in a 50 ohm system with
a DC supply voltage tolerance of +/- 2%.
Parameter
Typical
Min. / Max.
Frequency Range
Gain
2000 to 8000 MHz
32 dB
2000 to 8000 MHz
31 dB
Input VSWR
Output VSWR
1.5:1
1.5:1
2.0:1 Max.*
2.0:1 Max.
Pout @ 1 dB Compression
3rd Order Output Intercept Point
2nd Order Output Intercept Point
+16 dBm
+23 dBm
+33 dBm
+15 dBm
-
-
Noise Figure
Supply Voltage
Supply Current
1.8 dB
+12 volts
130 mA
2.5 dB
+12 volts
150 mA Max.
*(S11 2.5:1 at 2000 - 3000 MHz)
Revision: 7/23/2013
Housing Size
RF Connectors
Operating Case Temp. (Min./Max. Values)
Typical values are measured at 25°C but not guaranteed.
1.500" L x 0.870" W x 0.300" H (Housing #088-00376)
Gold Plated Pins or SMA Female
-20°C to +70°C
Maximum (No Damage) Ratings
Storage Temperature
Operating Temperature (Case)
DC Voltage @ 25°C
Input Drive @ 25°C (CW)
-65°C to +125°C
-40°C to +85°C
+15 VDC
+10 dBm
Spectrum Microwave, Inc. ⢠PH: 888.553.7531 ⢠Fax: 888.553.7532 ⢠Email: sales@SpectrumMicrowave.com ⢠www.SpectrumMicrowave.com
|
▷ |