BXHF1057 Datasheet, PDF (1/2 Pages) API Technologies Corp – Microwave Amplifi er

FEATURES
• Output Power @ 1dB Comp.: +16 dBm
• Reverse Bias Protection
• Laser Sealed Housing
• Input RF Surge Protection
Microwave Amplifier
2000 to 8000 MHz
Model BXHF1057
The Model BXHF1057 is standard high frequency amplifier covering 2000 MHz to 8000 MHz. This two stage design, utilizes
an input voltage regulator to protect against fluctuations in supply voltage, reverse bias protection circuitry, and a laser
sealed housing for the ultimate in environmental protection. This standard design may also be ordered in a screened MIL-
STD-883 version as a model SXHF1057. All specification ratings are based on measurements in a 50 ohm system with a
DC supply voltage tolerance of +/- 2%.
Parameter
Typical
Min. / Max.
Frequency Range
Gain
2000 to 8000 MHz
16 dB
2000 to 8000 MHz
15 dB Min.
Input VSWR
Output VSWR
1.5:1
1.5:1
2.0:1 Max.
2.0:1 Max.
P_out @ 1 dB Compression
3rd Order Output Intercept Point
2nd Order Output Intercept Point
+16 dBm
+23 dBm
+33 dBm
15 dBm Min.
-
-
Noise Figure
Supply Voltage
Supply Current
1.8 dB
+12 volts
65 mA
2.5 dB Max.
+12 volts
75 mA Max.
Revision: 9/12/2013
Housing Size
RF Connectors
Operating Case Temp. (Min./Max. Values)
Typical values are measured at 25°C but not guaranteed.
0.870" L x 1.060" W x 0.300" H (Housing # 088-00370)
Gold Plated Pins or SMA Female
-20°C to +70°C
Maximum (No Damage) Ratings
Storage Temperature
Operating Temperature (Case)
DC Voltage @ 25°C
Input Drive @ 25°C (CW)
-65°C to +125°C
-40°C to +85°C
+15 VDC
+10 dBm
Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: [phone] • Email: [e-mail] • www.SpectrumMicrowave.com