|
BXHF1056 Datasheet, PDF (1/2 Pages) API Technologies Corp – Microwave Amplifi er | |||
|
FEATURES
⢠Output Power @ 1dB Comp.: +20 dBm
⢠Reverse Bias Protection
⢠Input Voltage Regulator
⢠Laser Sealed Housing
⢠Input RF Surge Protection
Microwave Ampliï¬er
2000 to 8000 MHz
Model BXHF1056
The Model BXHF1056 is standard high frequency ampliï¬er covering 2000 MHz to 8000 MHz. This single stage design,
utilizes an input voltage regulator to protect against ï¬uctuations in supply voltage, reverse bias protection circuitry, and a
laser sealed housing for the ultimate in environmental protection. This standard design may also be ordered in a screened
MIL-STD-883 version as a model SXHF1056. All speciï¬cation ratings are based on measurements in a 50 ohm system with
a DC supply voltage tolerance of +/- 2%.
Parameter
Typical
Min. / Max.
Frequency Range
Gain
Pout @ 1 dB Compression
2000 to 8000 MHz
7.5 dB
+20 dBm
2000 to 8000 MHz
6.5 dB
+19 dBm
Input VSWR
Output VSWR
1.5:1
1.5:1
2.0:1 Max.
2.0:1 Max.
3rd Order Output Intercept Point
2nd Order Output Intercept Point
Noise Figure
Supply Voltage
Supply Current
Revision: 12/4/2013
Housing Size
RF Connectors
Operating Case Temp. (Min./Max. Values)
+30 dBm
-
+40 dBm
-
5.0 dB
6.0 dB
+12 to 15 volts
110 mA
+12 to +15 volts
125 mA Max.
Typical values are measured at 25°C but not guaranteed.
1.060" L x 0.870" W x 0.360" H
Gold Plated Pins or SMA Female
-20°C to +70°C
Maximum (No Damage) Ratings
Storage Temperature
Operating Temperature (Case)
DC Voltage @ 25°C
Input Drive @ 25°C (CW)
-65°C to +125°C
-40°C to +85°C
+17 VDC
+20 dBm
Spectrum Microwave, Inc. ⢠PH: 888.553.7531 ⢠Fax: 888.553.7532 ⢠Email: sales@SpectrumMicrowave.com ⢠www.SpectrumMicrowave.com
|
▷ |