ADX158L-3 Datasheet, PDF (1/1 Pages) API Technologies Corp – DOUBLE BALANCED MIXER

DOUBLE BALANCED MIXER
MODEL ADX158L-3
Available as: ADX158L-3, SMA
Connectorized Housing (ADX3)
Features
Conversion Loss: 5.5 dB Typical
LO to RF Isolation: 30 dB Typical
Electrical Speci cations ⁽¹⁾ :
Parameter
SSB (IF) Conversion loss:
RF (GHz)
8.0 - 15.0
8.0 - 15.0
Conditions
LO (GHz)
8.0 - 15.0
8.0 - 15.0
IF (GHz)
DC to 0.5
DC to 1.0
RF: 8 to 15 GHz
LO: 8 to 15 GHz
IF: DC to 1 GHz
Specifications
Typical
Min _{Ta= 25 ºC}
5.5 dB
6.0 dB
Max
7.0 dB
7.5 dB
Isolation
LO to RF
LO to IF:
LO to IF:
8.0 - 15.0
8.0 - 12.0
12.0 - 15.0
20 dB
12 dB
20 dB
30 dB
15 dB
25 dB
Input 1 dB Compression Point
Input Third Order Intercept Point
8.0 - 15.0
8.0 - 15.0
8.0 - 15.0
8.0 - 15.0
DC to 1.0
DC to 1.0
+2 dBm
+7 dBm
LO Power Input:
8.0 - 15.0
8.0 - 15.0
DC to 1.0 7.0 dBm +10 dBm +13 dBm
Notes: 1. Speci cations are guaranteed when tested as a downconverter in a 50 Ohm system.
2. Noise gure is typically within ±0.5 dB of the SSB conversion loss for IF frequencies greater than 10 MHz.
3. Case material is a corrosion resistent copper-nickel alloy (no nish required) per MIL-C-15726F.
4. Units are metal-to-metal hermetically sealed using resistance welding.
5. Operating Temperature Range: -55ºC to + 100ºC
Case Outline
Typical Performance at 25 ºC
Conversion Loss (dB)
3
f LO <f RF
4
5
6
7
8.0
GHz
RFtoIF Isolation(dB)
20
30
f IF= ⁴⁰
100MHz ₅₀
500 MHz
1GHz 60
15.0
8.0
GHz
15.0
LOVSW R
1.0
1.5
2.0
2.5
LOtoRF ,LOtoIFIsolation(dB)
0
10
LO-IF
20
LO-RF
30
3.0
8.0
1.0
1.5
2.0
GHz
IFVSW R
40
16.0
8.0
GHz
15.0
RFVSW R
1.0
1.5
2.0
2.5
2.5
3.0
3.0
0
GHz
1.0
8.0
GHz
15.0
Connector Con guration Dash Numbering
Dash
Connectors
Number R Port I Port
L Port
-1 All SMA Female with Spacer Plate
-2 Pins only (no connectors supplied)
-3 All SMA female. No spacer plate supplied.
Spacer plate is a .110 in (2.8 mm) thick plate mounted to the mixer mounting surface
which increases connector height to allow for mating connector clearance.
Plate is secured to the mixer by screws using the hole pairs adjacent to the LO and RF connectors.
Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH [phone] · Fax [phone]/06
www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH [phone] · Fax [phone]