616058 Datasheet, PDF (1/2 Pages) API Technologies Corp – PHASE LOCKED OSCILLATOR

PHASE LOCKED OSCILLATOR
MODEL 616058 (11 GHz)
Features
! Low Phase Noise: -117 dBc/Hz @ 100 KHz
! Low Spurious: -70 dBc Typical
! Internal Reference Design
! Environmental Screening Available
Specifications
CHARACTERISTIC
Frequency
TYPICAL
Ta= 25 ºC
11 GHz
MIN/MAX
Ta = -20 ºC to +70 ºC
11 GHz
Output Power (dBm)
+10
+9
Variation Over
Temperature (dBm)
+0.75
+1
Spurious (dBc)
-70
-60
Phase Noise (dB)
-37 dBc/Hz @ 10 Hz
-67 dBc/Hz @ 100 Hz
-92 dBc/Hz @ 1 KHz
-107 dBc/Hz @ 10 KHz
-117 dBc/Hz @ 100 KHz
VSWR
Harmonics (dBc)
Lock Indicator
1.5
-25
TTL (High=Locked)
2.0
-20
TTL (Low=Unlocked)
Stability (ppm)
Storage Temperature
+1
-55 ºC
+15
+125 ºC
Supply Power DC
15
15
mA
150
160
Description
Spectrum Microwave’s Series 600 Phase Locked
Oscillators use a High “Q” Dielectric Resonator in
the resonant circuit. The circuit is lightly loaded to
obtain the lowest phase noise possible.
The resonator is screwed to a printed circuit
board and well grounded to minimize modulation
sidebands during shock and vibration.
Isolators are used to provide isolation from load
VSWRs; Regulators filter noise on the DC input
voltage.
External reference models are also available.
A lock indicator circuit is provided to signal an
out-of-lock condition.
Spectrum Microwave, Inc.
www.SpectrumMicrowave.com
2707 Black Lake Place Phila, Pa. 19154
Rev.
PH: 215-464-4000 FAX: [phone]