|
54-848-005 Datasheet, PDF (1/2 Pages) API Technologies Corp – Current ratings up to 100 Amps | |||
|
High Current/High Voltage
Resin Sealed Filters
High current filters are ideal for use in high current
5 volt logic buss, but also can be used for ±48 VDC
telephone rack buss, high current switch mode power
supplies and DC charging systems. High voltage filters
find use in high voltage power supplies and applications
requiring U.L. Hi-Pot.
Features
s Current ratings up to 100 Amps
s Continuous voltage ratings up to
1250 VDC/240 VAC (400Hz)
s U.L. 1459 recognized and CSA C22.2 approved
versions available
s Rugged bolt-in style for easy installation
Installation Notes
for Figure 1 & 2 â see below (Figure 3 see page CF6)
1. Mounting installation torque
Method A: Mounting in full threaded through-hole
Maximum torque: 96 in-lbs
Method B: Mounting w/hardware
Maximum torque: 84 in-lbs
2. Terminal installation torque
Maximum torque: 20 in-lbs
Note: Use two-wrench method to install
terminal hardware
1-1/2 Imperfect Thds.
.060 Max., Typ.
5/16â24 Unfâ2A Thd.
.250
(6.35)
ø .062 ± .005
(1.58 ± .13)
Typ.
.815
(
Hex.
.250
(6.35)
Min.
.250
(6.35)
.250
(6.35)
.250
(6.35)
Min.
Typ.
.
Figure 3
.500
(12.7)
Hex.
.563
(
Dimensions in inches (mm)
API TECHNOLOGIES ⢠8061 Avonia Rd. ⢠Fairview, PA 16415 ⢠Ph: 814-474-1571 ⢠Fax: 814-474-3110 ⢠eis.apitech.com
API TECHNOLOGIESâ SPECTRUM CONTROL GmbH ⢠Hansastrasse 6 ⢠91126 Schwabach, Germany ⢠Phone: (49)-9122-795-0 ⢠Fax: (49)-9122-795-58
LP24
|
▷ |