310-027023-003 Datasheet, PDF (1/1 Pages) API Technologies Corp – Local Oscillator x21 Multiplier 100 MHz

Typical Applications
 Synthesizer Building Block
 EW
 ELINT
 SIGINT
Local Oscillator x21 Multiplier
100 MHz
Model 310-027023-003
Features
 Low Spurious less than -60 dBc
 Superior Phase Noise: -130 dBc/Hz @ 10 kHz
 Buffered Input
 High Output +17 dBm drive Level
 Integral Voltage Regulator
 Conduction Cooled
 Lightweight Aluminum Housing
General Description
The 310-027023-003 Multiplier is a x21 design
providing the system designer with a compact, low
phase noise building block for reference oscillator
multiplication applications. A linear amplifier drives a
step recovery diode thereby multiplying an input
100 MHz clock signal by a factor of 21.
A pair of selective 3-pole internal bandpass filters along
with a pair of linear driver amplifiers help to deliver low
spurious response. The unit exhibits very little
degradation of input reference signals, multiplying to
the desired output frequency while degrading the input
phase noise performance by only 28 dB.
Typical Performance
Parameter
Input Frequency
Input Level
Output Frequency
Output Level
Spurious
VSWR
Phase Noise Degradation
DC Power
Temperature
Typical Specifications
100 MHz
+10 dBm ± 0.1 dB
2100 MHz
+17 dBm ± 2 dB
-60 dBc
2.0:1
1.7 dB (above ideal)
+12 volts / 500 mA
-40 °C to +85 °C
All specifications above measured at +25 °C
Spectrum Microwave  38166 Old Stage Road  Delmar, Delaware 19940
Phone: [phone]  Fax: [phone]
Page 1 of 1
Web: www.SpectrumMicrowave.com
Last Revision: 2010-10-13