XL203A Datasheet, PDF (1/2 Pages) API Delevan – Triaxial Analog Accelerometer

PRELIMINARY
Triaxial Analog Accelerometer
Rugged, Small, ±6 g or ±15 g
XL203A
• High Accuracy Acceleration Measurement - The voltage • Calibration Certificate - Each XL203A is supplied with a
output of the XL203A is directly proportional to the acceleration
calibration certificate listing sensitivity and offset, as well as the
along the axes. Each DC-coupled sensor output is fully scaled,
on-axis and transverse alignment parameters needed to ensure
referenced, and calibrated.
rapid and efficient system implementation. The alignment data
• Rugged for Harsh Environments - The XL203A is robust
can be used to compensate the measured values if needed.
and can be used in harsh environments. The machined 6061-T6 • Self-Test - A TTL-compatible self-test input causes a simulated
aluminum case has a black anodized finish per MIL-A-8625,
acceleration to be injected into the accelerometer to verify chan-
plus the shielded cable has a high-temperature PVC jacket and
nel integrity and wiring connections.
Teflon-insulated conductors. The unit has resilient power and will _{• Easy Installation - Integrated cable with 9-pin connector}
survive 5000 g powered and unpowered.
makes it easy to wire. Four tapped holes simplify mounting, and
• Small Size - Completely conditioned triaxial accelerometer in
optional mounting adapters are also available.
less than one cubic inch.
• ­Built-In Power Supply Regulation - Unregulated DC power
• Earth Friendly Design - Lead-free design makes the XL203A
environmentally safe while API Technologies’ assembly process
from +8.5 to +36 Volts is all that is required to measure accelera-
ensures reliable functionality. Fully potted electronics eliminates
tion and temperature.
the possibility of tin whiskers-related failures.
• Three-Year Warranty - API Technologies accelerometers
come with a three-year factory warranty.
*Technical Data subject to change without notice
The XL203A is ready when you are. In stock and ready to ship, you can be taking measurements in less time
than with built-to-order accelerometers.
The small size and built-in power regulation allow the XL203A to fit where other accelerometers can’t. Choose
bandwidth of 100 Hz or 800 Hz and range options of ±6 g or ±15 g to measure accelerations on three axes.
The accelerometers have a nominal full scale output swing of ±2 Volts. The zero g output level is nominally
+2.5 Volts. Precise values are available on the included calibration certificate.