NSL-37-004 Datasheet, PDF (1/1 Pages) API Delevan – Compact, moisture resistant package

NSL-37-004
Optocoupler
Features
 Compact, moisture resistant package
 Low LED current
 Passive resistance output
Description
This NSL-37-004 optocoupler consists of an LED
input optically coupled to a photocell. The photocell
resistance is high when the LED current is “off” and
low when the LED current is “on”.
Absolute Maximum Ratings
Storage Temperature
Operating Temperature
Soldering Temperature (2)
Isolation Voltage (peak)
-40 to +75C
-40 to +75C
260C
2500V
Note:
(1) Derate linearly to 0 at 75C
(2) >2 mm from case for <5 sec.
(3) Print “FULLTONE OPTO-1” and date code
YYWW.
(4) Approved LED APC16792 to be used only.
9_9..₆0
40 min.
8₈._.6₂4 ^{5.1 1}
2
0.43 - 0.49 mm
all leads
Dimensions in mm.
Tolerance: +/-0.1mm
FULLTONE
OPTO-1
YYWW
10₁.4₁6
40 min.
3 _{5.1 10.0}
4
8.64 mm
8.2
1
LED
2
Circuit Schematic
3
PHOTOCELL
4
Electrical Characteristics (T_A=25C unless otherwise noted)
Symbol
Parameter
Min Typ Max Units
Test Conditions
LED
I_F
Forward Current
V_F
Forward Voltage
V_R
Reverse Voltage
Cell
40 mA
2.5
V ^IF ^{= 20 mA}
3.0 V
V_C
Maximum Cell Voltage
P_D
Power Dissipation
Coupled
100 V ^{(Peak AC or DC)}
175 mW ⁽¹⁾
R_ON
On Resistance
125
250
 ^{IF = 40 mA, 100% test per lot.}
 ^{IF = 10 mA, sample test per lot, data on file.}
0.5 1.5 3.5 K ^IF ^{= 1 mA, sample test per lot, data on file.}
50
K ^{IF = 0.1 mA, sample test per lot, data on file.}
R_OFF
T_R
Off Resistance
Rise Time
500
100
M ^{10 sec after IF = 0 mA, 100% test per lot.}
µsec ^{(Vcc =9V, RL=1 M ohm), Time to reach 63% of its saturation}
value after the photocell is illuminated.
T_F
Decay Time
35 msec ^{(Vcc =9V, RL=1 M ohm), Time to decay to 37% of its}
saturation value (~100K ohm) after the light is removed.
Specifications subject to change without notice.
REV 07/08-14
Advanced Photonix Canada Inc.,
300 St-Sacrement
Suite 519
Montréal, QC, Canada H2Y 1X4
Page 1
Phone:[phone]
Fax: [phone]
http://www.advancedphotonix.com