MIL2510-00K Datasheet, PDF (1/1 Pages) API Delevan – Unshielded Surface Mount Inductors

Series MIL2510
MI ^{L I TARY}
APPROVED
Unshielded Surface Mount Inductors
Military QPL Approval
M83446/28Phenolic Core
M83446/29Iron Core
M83446/30Ferrite Core
†Ordering Note Military parts must be ordered to
the M83446/ part number
Physical Parameters
Inches
Millimeters
A
0.235 to 0255 5.97 to 6.48
B
0.085 to 0.105 2.16 to 2.67
C
0.090 to 0.110 2.29 to 2.79
D
0.060 to 0.080 1.52 to 2.03
E
0.035 to 0.055 0.89 to 1.40
F
0.100 (Ref. only) 2.54 (Ref. only)
G
0.059 (Ref. only) 1.47 (Ref. only)
Dimensions “A” and “C” are over terminals.
Weight Max. (Grams)
Phenolic: 0.19
Iron & Ferrite: 0.22
Operating Temperature Range
Phenolic: –55°C to +125°C
Iron & Ferrite: –55°C to +105°C
Current Rating at 90°C Ambient
Phenolic: 35°C Rise
Iron & Ferrite: 15°C Rise
Maximum Power Dissipation at 90°C Ambient
Phenolic:0.145 Watts
Iron & Ferrite: 0.062 Watts
Packaging Tape & reel (12 mm): 7" reel, 750 pieces
max.; 13"‑reel, 2700 pieces max.
Made In the U.S.A. Patent Protected
DASH
NUMBER*
MIL
DASH
#INDU(CµTHA) _N±C10E%
Q
MINIMUM
TEST
FREQUENCY
SRF
M(MINHIzM) ^{UDMC(MRHMEzSA)IXSITMAUNCMCUE(RORHMEMANSXT). R(mAATI)NG}
M83446/28– SERIES MIL2510 PHENOLIC CORE
-00K
01F
0.10 25 25.0 640.0
0.14 865
-02K
02F
0.12 25 25.0 610.0
0.17 785
-04K
03F
0.15 25 25.0 530.0
0.20 725
-06K
04F
0.18 25 25.0 510.0
0.22 690
-08K
05F
0.22 25 25.0 480.0
0.26 635
-10K
06F
0.27 25 25.0 440.0
0.40 510
-12K
07F
0.33 25 25.0 410.0
0.50 455
-14K
08F
0.39 25 25.0 380.0
0.60 415
-16K
09F
0.47 25 25.0 340.0
0.63 405
M83446/29– SERIES MIL2510 IRON CORE
-18K
01F
0.56 35 25.0 240.0
0.19 500
-20K
02F
0.68 35 25.0 210.0
0.21 475
-22K
03F
0.82 35 25.0 200.0
0.24 444
-24K
04F
1.0
35 7.9 180.0
0.27 418
-26K
05F
1.2
25 7.9 160.0
0.32 385
-28K
06F
1.5
30 7.9 140.0
0.53 300
-30K
07F
1.8
30 7.9 125.0
0.59 283
-32K
08F
2.2
30 7.9 120.0
0.76 250
-34K
09F
2.7
30 7.9 100.0
0.90 229
-36K
10F 3.3 35 7.9
90.0 1.35 187
-38K
11F 3.9 35 7.9
85.0 1.70 167
-40K
12F 4.7 35 7.9
80.0 2.30 143
-42K
13F 5.6 35 7.9
75.0 3.10 123
-44K
14F 6.8 35 7.9
64.0 3.60 114
-46K
15F 8.2 35 7.9
50.0 4.8
99
-48K
16F 10.0 35 7.9
45.0 5.7
91
-50K
17F 12.0 25 2.5
29.0 3.3
120
-52K
18F 15.0 25 2.5
24.0 3.8
110
-54K
19F 18.0 25 2.5
21.0 4.2
106
-56K
20F 22.0 25 2.5
18.0 4.7
100
-58K
21F 27.0 25 2.5
17.0 5.7
91
-60K
22F 33.0 25 2.5
15.0 6.2
87
-62K
23F 39.0 25 2.5
13.0 8.1
76
-64K
24F 47.0 25 2.5
12.0 9.8
69
-66K
25F 56.0 25 2.5
11.0 12.0
62
-68K
26F 68.0 25 2.5
10.0 13.8
58
-70K
27F 82.0
25 2.5
9.0 19.0
50
-72K
28F 100.0
25 2.5
8.9 21.0
47
M83446/30– SERIES MIL2510 FERRITE CORE
-74K
01F 120.0 15 0.79
8.5 17.0
52
-76K
02F 150.0 15 0.79
7.6 19.0
49
-78K
03F 180.0 15 0.79
7.2 21.5
46
-80K
04F 220.0 15 0.79
6.8 32.0
38
-82K
05F 270.0 15 0.79
6.2 37.0
35
-84K
06F 330.0 15 0.79
5.3 47.0
31
-86K
07F 390.0 15 0.79
5.0 53.0
30
-88K
08F 470.0 15 0.79
4.6 60.0
28
-90K
09F 560.0 15 0.79
4.3 71.0
25
-92K
10F 680.0 15 0.79
3.8 83.0
23
-94K
11F 820.0 15 0.79
3.2 95.0
22
-96K
12F 1000.0 15 0.79
2.4 108.0
20
Parts listed above are QPL/MIL qualified
*Complete part # must include series # PLUS the dash #
For further surface finish information,
refer to TECHNICAL section of this catalog.
PAGE
32
www.delevan.com E-mail: [e-mail]
270 Quaker Rd., East Aurora NY 14052 • Phone [phone] • Fax [phone]
6/2007