1840-00M Datasheet, PDF (1/1 Pages) API Delevan – Molded Unshielded RF Coils

Series ^1840R
1840 MILI TARY
APPROVED
Molded Unshielded RF Coils
Military Specifications
MS75008 (LT4K); MS75101 (LT10K)
Physical Parameters
Inches
Length
0.437 ± 0.010
Diameter
0.187 ± 0.010
Lead Size
AWG #22 TCW 0.025 ± 0.002
Lead Length
1.44 ± 0.12
Millimeters
11.10 ± 0.25
4.75 ± 0.25
0.635 ± 0.051
36.58 ± 3.05
Current Rating at 90°C Ambient
LT4K 35°C Rise
LT10K 15°C Rise
Operating Temperature Range
LT4K –55°C to +125°C;
LT10K –55°C to +105°C
Maximum Power Dissipation at 90°C
LT4K 0.385 W
LT10K 0.165 W
Weight Max. (Grams) 0.95
Packaging Tape & reel: 12" reel, 2500 pieces max.;
14" reel, 3000 pieces max. For additional packaging
options, see technical section.
g No MS # Issued
Made in the U.S.A.
DASH
NUMBER*
MIL
DASH
#INDUCTANCE
(µH)
TOLERANCQE
MINIMUMTEST
FREQSUREFNMCIYN(IMMDUHCMz)R(MMESAHIXzS)ITMACUNUMCRE(ROMEHANMXTISMR)UAMTIN(mGA)
MS75008– SERIES 1840 PHENOLIC CORE (LT4K)
-00M 21 0.15 ± 20% 55 25.0 510 0.030 3050
-02M 22 0.22 ± 20% 55 25.0 415 0.035 2820
-04M 23 0.33 ± 20% 55 25.0 350 0.050 2360
-05M g 0.39 ± 20% 55 25.0 300 0.080 1860
-06M 24 0.47 ± 20% 55 25.0 300 0.080 1860
-07K
25 0.56 ± 10% 55 25.0 270 0.100 1670
-08K
26 0.68 ± 10% 55 25.0 250 0.120 1520
-09K
27 0.82 ± 10% 55 25.0 220 0.180 1240
-10K
28 1.00 ± 10% 55 25.0 200 0.250 1050
-11K
29 1.20 ± 10% 35
7.9 180 0.400 835
-12K
30 1.50 ± 10% 35
7.9 170 0.485 755
-13K
31 1.80 ± 10% 35
7.9 150 0.740 610
-14K
32 2.20 ± 10% 35
7.9 140 0.900 555
-16K
33 2.70 ± 10% 35
7.9 120 1.100 525
MS75101– SERIES 1840 IRON CORE (LT10K)
-18K
1 3.30 ± 10% 35 7.9 70 0.120
-20K
2 3.90 ± 10% 35 7.9 65 0.155
-22K
3 4.70 ± 10% 35 7.9 60 0.210
-24K
4 5.60 ± 10% 35 7.9 50 0.280
-26K
5 6.80 ± 10% 35 7.9 50 0.375
-28K
6 8.20 ± 10% 35 7.9 48 0.400
-30K
7 10.0 ± 10% 35 7.9 42 0.600
-32K
8 12.0 ± 10% 50 2.5 36 0.850
-34K
9 15.0 ± 10% 55 2.5 30 1.200
-35K
10 18.0 ± 10% 60
2.5 30 1.800
-36K
11 22.0 ± 10% 60
2.5 24 2.000
-38K
12 27.0 ± 10% 65
2.5 22 2.750
1020
900
775
670
580
560
455
385
324
265
251
214
Parts listed above are QPL/MIL qualified
Optional Tolerances: J = 5% H = 3% G = 2% F = 1%
*Complete part # must include series # PLUS the dash #
For further surface finish information,
refer to TECHNICAL section of this catalog.
4/2005
www.delevan.com E-mail: [e-mail]
270 Quaker Rd., East Aurora NY 14052 • Phone [phone] • Fax [phone]
PAGE
47