100-150N Datasheet, PDF (1/1 Pages) API Delevan – Micro i Ribbon-Lead Inductors

Series
100R
100
Micro i^® Ribbon-Lead Inductors
Military Specifications MS21367 (LT10K)
Physical Parameters
Inches
A 0.065 Max.
B 0.100 ± 0.010
C 0.100 ± 0.010
D 0.210 Min.
E 0.012 ± 0.002 (Typ.)
F 0.095 ± 0.015
G 0.002 +0.001-0.000
Millimeters
1.65 Max.
2.54 ± 0.254
2.54 ±0 .254
5.33 Min.
0.30 ± 0.05
2.41 ± 0.381
0.05 +0.025-0.000
Weight Max. (Grams) 0.03
Current Rating at 90°C Ambient 15°C Rise
Operating Temperature Range –55°C to +105°C
Maximum Power Dissipation at 90°C0.0205‑Watts
Notes 1) L, Q and SRF measured on Boonton Q
and RX meters using special test fixtures. Details for
fixtures available. 2) Part number and quantity will
appear on package as units are too small for legible
marking.
Core Material Iron (LT10K)
Mechanical Configuration 1) Units are epoxy
encapsulated. 2) Leads are tin/lead plated Beryllium
Copper 3) Gold Plated leads available on special
order. 4) RoHS compliant part available by ordering
100R Series.
Packaging Bulk only
Made In the U.S.A. Patent Protected
DASH
NUMBER*
MIL
DASH
#INDUCTANCET(µOHL)ERANCQEMINIMUTMEST
FREQSUREFNMCYIN(IMMDHUCzMR) ^{(EMMSAHISXzTI)MAUNCMCUE(RORMHEAMNXST.)(RmAAT)ING}
MS21367– SERIES 100 IRON CORE (LT10K)
-150N
1 0.015 ±30% 40 50.0 250 0.065 492
-220N
2 0.022 ±30% 40 50.0 250 0.090 418
-330N
3 0.033 ±30% 40 50.0 250 0.115 370
-470N
4 0.047 ±30% 40 50.0 250 0.120 360
-680N
5 0.068 ±30% 40 50.0 250 0.150 324
-101N
6 0.100 ±30% 40 50.0 250 0.170 304
-121M
7 0.12 ±20% 35 25.0 250 0.140 335
-151M
8 0.15 ±20% 40 25.0 250 0.160 313
-181M
9 0.18 ±20% 40 25.0 250 0.190 287
-221M 10 0.22 ±20% 40 25.0 250 0.21 274
-271M 11 0.27 ±20% 40 25.0 250 0.24 256
-331M 12 0.33 ±20% 40 25.0 250 0.25 251
-391M 13 0.39 ±20% 40 25.0 200 0.28 237
-471M 14 0.47 ±20% 40 25.0 175 0.31 225
-561M 15 0.56 ±20% 40 25.0 170 0.45 185
-681M 16 0.68 ±20% 40 25.0 165 0.62 159
-821M 17 0.82 ±20% 35 25.0 160 0.65 155
-102M 18 1.00 ±20% 35 25.0 135 0.73 145
-122K 19 1.20 ±10% 35 7.9 120 1.00 125
-152K 20 1.50 ±10% 32 7.9 110 1.20 114
-182K 21 1.80 ±10% 32 7.9 95 1.50 102
-222K 22 2.20 ±10% 35 7.9 80 1.70
96
-272K 23 2.70 ±10% 35 7.9 70 2.00
89
-332K 24 3.30 ±10% 37 7.9 65 2.20
84
-392K 25 3.90 ±10% 37 7.9 60 2.80
75
-472K 26 4.70 ±10% 40 7.9 55 3.10
71
-562K 27 5.60 ±10% 40 7.9 50 3.30
69
-682K 28 6.80 ±10% 40 7.9 45 3.80
64
-822K 29 8.20 ±10% 40 7.9 43 5.00
56
-103K 30 10.0
±10% 40 7.9 40 5.60
53
Parts listed above are QPL/MIL qualified
Optional Tolerances:   J = 5% H = 3% G = 2% F = 1%
*Complete part # must include series # PLUS the dash #
For further surface finish information,
refer to TECHNICAL section of this catalog.
PAGE

www.delevan.com E-mail: [e-mail]
270 Quaker Rd., East Aurora NY 14052 • Phone [phone] • Fax [phone]
6/2007