TO247 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – HEXFET TO-247AC Outline Dimensions are shown in millimeters (inches)

ALPHA & OMEGA
SEMICONDUCTOR
Ａ
Ａ
RECOMMENDED LAND PATTERN
UNIT: mm
NOTE
1. PAKCAGE BODY SIZES EXCLUDE MOLD FLASH AND GATE BURRS.
MOLD FLASH AT THE NON-LEAD SIDES SHOULD BE LESS THAN 6 MILS EACH.
2. CONTROLLING DIMENSION IS MILLIMETER.
CONVERTED INCH DIMENSIONS ARE NOT NECESSARILY EXACT.