|
AOZ1300 Datasheet, PDF (1/12 Pages) Alpha & Omega Semiconductors – Programmable 4A Power Distribution Switch | |||
|
AOZ1300
Programmable 4A Power Distribution Switch
General Description
The AOZ1300 is a current-limited power distribution
switch intended for applications that require circuit
protection. The device operates from a 2.7V to 6.0V
input supply and provides up to 4A load current.
AOZ1300 offers robust fault protection features including
over-current/short-circuit protection and thermal overload
protection. The current limit is programmable with an
external resistor. An open-drain fault indicator is provided
to alert a system controller of thermal overload, over-
current, and short-circuit events. A 24ms fault blanking
time eliminates false alarms.
The AOZ1300 employs internal soft-start circuitry to
control inrush current due to highly capacitive loads
associated with hot-plug events. An adjustable slew rate
control pin provides additional slew rate control if needed.
The AOZ1300 is available in SO-8 package.
Features
â 40m⦠maximum on-resistance
â 4A maximum continuous current
â 2.7V to 6.0V operating voltage
â Resistor programmable current limit
â Reverse current blocking
â Thermal overload protection
â Very fast short-circuit response time
â Fault latch with 24ms blanking time
â Open-drain fault indicator
â 1µA shutdown current
Applications
â Docking stations
â Notebook PCs
â RAID systems
â Telecom and Server hot-plug
â USB Power Distribution
â Compact PCI adapter Cards
Typical Application
VIN
IN
OUT
C1
1µF
R1
100kâ¦
AOZ1300
FAULT
FLT
OFF ON
EN
SLEW
C3
10nF
GND
ISET
R2
10kâ¦
VOUT TO USB
PORT
C2
4.7µF
Figure 1. High Current USB Host
Rev. 1.3 August 2008
www.aosmd.com
Page 1 of 12
|
▷ |