|
AOZ1022DI-01 Datasheet, PDF (1/15 Pages) Alpha & Omega Semiconductors – EZBuck™ 3A Synchronous Buck Regulator | |||
|
AOZ1022DI-01
EZBuck⢠3A Synchronous Buck Regulator
General Description
The AOZ1022DI-01 is a synchronous high efficiency,
simple to use, 3A buck regulator. The AOZ1022DI-01
works from a 4.5V to 16V input voltage range, and
provides up to 3A of continuous output current with an
output voltage adjustable down to 0.8V.
The AOZ1022DI-01 comes in a DFN 5x4 package and is
rated over a -40°C to +85°C ambient temperature range.
Features
ï¬ 4.5V to 16V operating input voltage range
ï¬ Synchronous rectification: 100m⦠internal high-side
switch and 20m⦠Internal low-side switch
ï¬ High efficiency: up to 95%
ï¬ Internal soft start
ï¬ Active high power good state
ï¬ Output voltage adjustable to 0.8V
ï¬ 3A continuous output current
ï¬ Fixed 500kHz PWM operation
ï¬ Cycle-by-cycle current limit
ï¬ Pre-bias start-up
ï¬ Short-circuit protection
ï¬ Thermal shutdown
ï¬ Small size DFN 5x4
Applications
ï¬ Point of load DC-DC conversion
ï¬ PCIe graphics cards
ï¬ Set top boxes
ï¬ DVD drives and HDD
ï¬ LCD panels
ï¬ Cable modems
ï¬ Telecom/networking/datacom equipment
Typical Application
VIN
C1
22µF
Ceramic
RC
CC
5V DC
R3
VIN
PGOOD
EN
AOZ1022DI-01 LX
COMP
L1 4.7µH
R1
FB
AGND
PGND
R2
VOUT
C2, C3
22µF Ceramic
Rev. 3.1 November 2012
Figure 1. 3.3V/3A Synchronous Buck Regulator
www.aosmd.com
Page 1 of 15
|
▷ |