APX9132G Datasheet, PDF (8/14 Pages) Anpec Electronics Coropration – Hall Effect Micro Switch IC

APX9132G
Application Information
It is strongly recommended that an external bypass ca-
pacitor be connected (is close to the Hall sensor) be-
tween the supply and ground of the device to reduce both
external noise and noise generated by the chopper-sta-
bilization technique. This is especially true due to the
relatively high impedance of battery supplies.
Copyright © ANPEC Electronics Corp.
8
Rev. A.1 - Oct., 2009
www.anpec.com.tw