|
APW7098 Datasheet, PDF (13/30 Pages) Anpec Electronics Coropration – Two- Phase Buck PWM Controller with Integrated MOSFET Drivers | |||
|
◁ |
APW7098
Pin Description (Cont.)
PIN
NO.
NAME
24
PHASE1
25
PGND
FUNCTION
Switch Node for Channel 1. Connect this pin to the source of high-side MOSFET and the drain of
the low-side MOSFET. This pin is used as sink for UGATT1 driver. This pin is also monitored by
the adaptive shoot-through protection circuitry to determine when the high-side MOSFET has
turned off. An Schottky diode between this pin and the ground is recommended to reduce
negative transient voltage, which is common in a power supply system.
Power Ground for the low-side gate drivers. Connect this pin to the source of low-side MOSFETs.
This pin is used as sink for LGATE1 and LGATE2 drivers.
Copyright © ANPEC Electronics Corp.
13
Rev. A.6 - Oct., 2009
www.anpec.com.tw
|
▷ |