APL1582 Datasheet, PDF (1/13 Pages) Anpec Electronics Coropration – DUAL INPUT LOW DROPOUT REGULATOR

APL1582
DUAL INPUT LOW DROPOUT REGULATOR
Features
General Description
• 450mV typ. Dropout at 3A in dual power
voltage mode
• Remote Sense Pin Available
• 2% Accuracy Over Temperature Range
• Build-in Over Temperature Protection
• Build-in Current Limit
• 5 Pin TO-220, TO-252 and TO-263 Packages
• No Supply Sequencing Problems in Dual
Supply Mode
Applications
• Microprocessor Supplies
•! Chip Set Supplies
• VGA Card Power
• LCD Monitor Power
The APL1582 of high performance positive voltage
regulators are designed for use in applications
requiring very low dropout voltage at 3Amps .
The APL1582 can provide a output voltage at the range
of 1.25V to 2.55V , where both 5V and 3.3V voltage
supplies are available .
The superior dropout characteristics result in reduced
heat dissipation compared to regular LDOs. The
APL1582 also provides excellent regulation over line ,
load , and temperature variations.
Current limit is trimmed to ensure specified output
current and controlled short-circuit current . On-chip
thermal limiting provides protection against any
combination of overload that would create excessive
junction temperature .
The APL1582 is available in both the through-hole
and surface mount versions of the industry standard
5-Pin TO-220, TO-252 and TO-263 power packages .
Ordering and Marking Information
APL1582
Handling Code
Temp. Range
Package Code
APL1582 F/G/U : APL1582
XXXXX
Package Code
F : TO-220-5
U : TO-252-5
Temp. Range
C : 0 to 70 °C
Handling Code
TU : Tube
G : TO-263-5
TR : Tape & Reel
XXXXX - Date Code
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
Copyright  ANPEC Electronics Corp.
1
Rev. A.4 - Apr., 2003
www.anpec.com.tw