APL1085 Datasheet, PDF (1/11 Pages) Anpec Electronics Coropration – 3A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 3.3V

APL1085
3A Low Dropout Fast Response Positive Adjustable Regulator and Fixed 3.3V
Features
General Description
• Fast Transient Response
• Guaranteed Dropout Voltage at Multiple Cur-
rents
• Load Regulation : 0.05% Typ.
• Line Regulation : 0.03% Typ.
• Low Dropout Voltage : 1.2V Typ. at I_OUT =3A
• Trimmed Current Limit : 3A Typ. at T_J=125 °C
• On-Chip Thermal Limiting : 150 °C Typ.
• Standard 3-pin TO-220 , TO-252 and TO-263
Power Package
Applications
The APL1085 is a low dropout three-terminal adjust-
able regulator with 3A output current capability. In
order to obtain lower dropout voltage and faster tran-
sient response, which is critical for low voltage
applications, the APL1085 has been optimized. The
output available voltage range of adjustable version
is from 1.25~5.75V with an input supply below 7V ,
and the fixed 3.3V output voltage device is also
available.
Current limit is trimmed to ensure specified output
current and controlled short-circuit current. On-chip
thermal limiting provides protection against any com-
bination of overload that would create excessive junc-
tion temperatures.
The APL1085 is available in both the through-hole
and surface mount versions of the industry standard
• Pentium^TM Processor Supplies
• PowerPC^TM Supplies
• Low Voltage Logic Supplies
• Battery-Powered Circuitry
• Post Regulator for Switching Power Supply
Pin Description
TAB is V_OUT
3
V_IN
2
V_OUT
1
ADJ
Front View APL1085 TO-220 Package
TAB is V_OUT
3
V _IN
2
V_OUT
1
ADJ
Front View APL1085 TO-252 Package
TAB is V_OUT
3
V _IN
2
V_OUT
1
ADJ
Front View APL1085 TO-263 Package
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
Copyright  ANPEC Electronics Corp.
1
Rev. B.5 - Jun., 2003
www.anpec.com.tw