APC558 Datasheet, PDF (1/11 Pages) Anpec Electronics Coropration – Dual Operational Amplifier

APC558
Dual Operational Amplifier
Features
General Description
• Power Supply Range :
• Signal Supply : 3V to 20V
• Dual Supply : ± 1.5V to ± 10V
• Large DC Voltage Gain : 100dB
• Large Output Swing : 0V ~ V_DD- 1.5V
• Bandwidth(unity gain) : 2MHz
• Internally Frequency Compensated for Unity
Gain
• Low Input Offset Voltage : 1mV
Applications
The APC558 consists of two independent, high gain,
internally frequency compensated operational am-
plifiers which were designed specifically to operate
from a single power supply up to 20 volts. Operation
from dual power supplies is also possible and the
power supply current drain is essentially indepen-
dent of the magnitude of the power supply voltage.
Application areas include transducer amplifiers, DC
gain blocks and all the conventional OP amplifier
circuits which can be more easily implemented in
single power supply systems. (For example, the
APC558 can be directly operated from the standard
+5V power supply voltage which is normally used in
digital systems.)
• Amplifiers
• Filters
• Analog Circuit
Ordering and Marking Information
APC558
APC558 J :
APC558 K/O :
Lead Free Code
Handling Code
Temp. Range
Package Code
APC558
XXXXX
APC558
XXXXX
Package Code
J : PDIP
K : SOP-8
O : TSSOP-8
Temp. Range
C : 0 to 70 ^° C
Handling Code
TU : Tube
TR : Tape & Reel
Lead Free Code
L : Lead Free Device Blank : O riginal Device
XXXXX - Date Code
XXXXX - Date Code
ANPEC reserves the right to make changes to improve reliability or manufacturability without notice, and advise
customers to obtain the latest version of relevant information to verify before placing orders.
Copyright  ANPEC Electronics Corp.
1
Rev. A.4 - July., 2002
www.anpec.com.tw