X3C35F1-03S Datasheet, PDF (6/18 Pages) Anaren Microwave – Tight Amplitude Balance

Model X3C35F1-03S
Rev C
Definition of Measured Specifications
Parameter
VSWR
(Voltage Standing Wave
Ratio)
Return Loss
Insertion Loss
Isolation
Phase Balance
Amplitude Balance
Group Delay
Definition
The impedance match of
the coupler to a 50
system. A VSWR of 1:1 is
optimal.
The impedance match of
the coupler to a 50
system. Return Loss is
an alternate means to
express VSWR.
The input power divided
by the sum of the power
at the two output ports.
The input power divided
by the power at the
isolated port.
The difference in phase
angle between the two
output ports.
Mathematical Representation
V max
VSWR =
Vmin
Vmax = voltage maxima of a standing wave
Vmin = voltage minima of a standing wave
VSWR 1
Return Loss (dB)= 20log
VSWR -1
Pin
Insertion Loss(dB)= 10log
P P cpl  direct
P in
Isolation(dB)= 10log
Piso
Phase at coupled port – Phase at direct port
The power at each output
divided by the average
power of the two outputs.
Pcpl
Pdirect
10log
and 10log
 Pcpl  Pdirect 
 Pcpl  Pdirect 




²ïƒ¸
²ïƒ¸
Group delay is average
of group delay’s from
input port to the coupled
port
Average ( GD-C)
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]
Available on Tape and
Reel for Pick and Place
Manufacturing.