RFP-250250N6X50-2 Datasheet, PDF (2/2 Pages) Anaren Microwave – Aluminum Nitride Terminations 40 Watts, 50ohm

Model RFP-250250N6X50-2
Typical Performance
Power Derating
Suggested Mounting Procedures
.025 MIN.
(2 PLACES)
100
75
BOARD LOWER
THAN LEAD.
50
SUGGESTED STRESS RELIEF METHODS
25
SCALE: NONE
1. Make sure that the devices are mounted on flat surfaces
0
(.001” under the device) to optimize the heat transfer.
25 50 75 100 125 150 _{2. Position device on mounting surface and solder in place}
CASE TEMPERATURE — °C
using an SN96 type solder.
3. Solder leads in place using an SN63 type solder with a
controlled temperature iron (700°F).
Available on Tape and Reel for Pick and Place Manufacturing.
2
Sales Desk USA: Voice: [phone] Fax: [phone]
Sales Desk Europe: Voice: ([phone] Fax: [phone]