RFP-150-XXXRL-S Datasheet, PDF (2/2 Pages) Anaren Microwave – Flanged Resistors 150 Watts

Model RFP-150-XXXRL-S
Specifications:
Part number
150-50RL-S
150-100RL-S
150-150RL-S
150-200RL-S
Frequency (GHz)
1.5
2.0
2.0
2.0
Resistance (Ω)
50
100
150
200
Capacitance (pF)
2.9
2.9
3.2
3.2
Power De-rating:
Mounting Footprint and Procedure:
.025 MIN.
(2 PLACES)
BOARD LOWER
THAN LEAD.
BOARD EVEN
WITH LEAD.
SUGGESTED STRESS RELIEF METHODS
SCALE: NONE
BOARD LOWER
THAN LEAD.
BOARD HIGHER
THAN LEAD.
NOT RECOMMENDED APPLICATION
SCALE: NONE
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]
Available on Tape and
Reel For Pick and Place
Manufacturing.
SUGGESTED MOUNTING PROCEDURES:
1. ^{MAKE SURE THAT THE DEVICES ARE MOUNTED ON}
FLAT SURFACES (.001" UNDER THE DEVICE) TO
OPTIMIZE THE HEAT TRANSFER.
2. DRILL & TAP THE HEATSINK FOR THE APPROPRIATE
THREAD SIZE TO BE USED.
3. COAT HEATSINK WITH A MINIMUM AMOUNT OF HIGH
QUALITY SILICONE GREASE (.001" MAX. THICKNESS).
4. POSITION DEVICE ON MOUNTING SURFACE & SECURE
USING SOCKET HEAD SCREWS, FLAT & SPLIT WASHER.
TORQUE SCREWS TO THE APPROPRIATE VALUE. MAKE
SURE THAT THE DEVICE IS FLAT AGAINST THE HEATSINK.
(CARE SHOULD BE TAKEN TO AVOID UPWARD PRESSURE OF
THE LEADS TOWARDS THE LID).
5. _{SOLDER LEADS IN PLACE USING APPROPROATE SOLDER WITH}
A CONTROLLED TEMPERATURE IRON.
** FOR MORE DETAILS CONTACT FACTORY **
150-XXXRL-S (097) Rev B