RFP-150-100RCGN-S Datasheet, PDF (2/2 Pages) Anaren Microwave – Flangeless Resistor 150 Watts, 100Ohms

Model RFP-150-100RCGN-S
Typical Performance:
RoHS
Compliant
Mounting Footprint and Procedure:
Derating:
.025
(2 PLACES)
BOARD LOWER
THAN LEAD.
BOARD EVEN
WITH LEAD.
SUGGESTED STRESS RELIEF METHODS
SCALE: NONE
BOARD LOWER
THAN LEAD.
BOARD HIGHER
THAN LEAD.
NOT RECOMMENDED APPLICATION
SCALE: NONE
SUGGESTED MOUNTING PROCEDURES:
1. MAKE SURE THAT THE DEVICES ARE MOUNTED ON
FLAT SURFACES (.001" UNDER THE DEVICE) TO
OPTIMIZE THE HEAT TRANSFER.
2. POSITION DEVICE ON MOUNTING SURFACE AND SOLDER
IN PLACE USING AN APPROPRIATE SOLDER TYPE OR A SN96 TYPE
SOLDER.
3. SOLDER LEADS IN PLACE USING SN96 TYPE SOLDER WITH
A CONTROLLED TEMPERATURE IRON. KEEP LEAD
LENGTH AS SHORT AS POSSIBLE USING A SUGGESTED
STRESS RELIEF METHOD.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]
Available on Tape and
Reel For Pick and Place
Manufacturing.
150-100RCGN-S (097) Rev B