JP503AS Datasheet, PDF (2/10 Pages) Anaren Microwave – High Isolation

Model JP503AS
Rev. A
Hybrid Coupler Pin Configuration
The JP503AS has an orientation marker to denote Pin 1. Once port one has been identified the other ports are
known automatically. Please see the chart below for clarification:
Configuration
Splitter
Splitter
Splitter
Splitter
*Combiner
*Combiner
*Combiner
*Combiner
Pin 1
Input
Isolated
-3dB   90
-3dB 
A   90
A 
Isolated
Output
Pin 2
Isolated
Input
-3dB 
-3dB   90
A 
A   90
Output
Isolated
Pin 3
-3dB   90
-3dB 
Input
Isolated
Isolated
Output
A   90
A 
Pin 4
-3dB 
-3dB   90
Isolated
Input
Output
Isolated
A 
A   90
*Notes:
“A” is the amplitude of the applied signals. When two quadrature signals with equal
amplitudes are applied to the coupler as described in the table, they will combine at the output
port. If the amplitudes are not equal, some of the applied energy will be directed to the isolated
port.
The actual phase, ^ , or amplitude at a given frequency for all ports, can be seen in our de-
embedded s-parameters, that can be downloaded at www.anaren.com.
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]
Available on Tape and
Reel For Pick and Place
Manufacturing.