100200P4Z50-2 Datasheet, PDF (2/2 Pages) Anaren Microwave – BeO Ceramic

Model 100200P4Z50-2
Typical Performance:
Data shown is for the 100200-4Z50-2
Power De-rating:
Data shown is for the 100200-4Z50-2
Mounting Footprint and Procedure:
SUGGESTED MOUNTING PROCEDURES:
1. ^{MAKE SURE THAT THE DEVICES ARE MOUNTED ON}
FLAT SURFACES (.001" UNDER THE DEVICE) TO
OPTIMIZE THE HEAT TRANSFER.
2. DRILL & TAP THE HEATSINK FOR THE APPROPRIATE
THREAD SIZE TO BE USED.
3. COAT HEATSINK WITH A MINIMUM AMOUNT OF HIGH
QUALITY SILICONE GREASE (.001" MAX. THICKNESS).
4. POSITION DEVICE ON MOUNTING SURFACE & SECURE
USING SOCKET HEAD SCREWS, FLAT & SPLIT WASHER.
TORQUE SCREWS TO THE APPROPRIATE VALUE. MAKE
SURE THAT THE DEVICE IS FLAT AGAINST THE HEATSINK.
(CARE SHOULD BE TAKEN TO AVOID UPWARD PRESSURE OF
THE LEADS TOWARDS THE LID).
5. _{SOLDER LEADS IN PLACE USING APPROPROATE SOLDER WITH}
A CONTROLLED TEMPERATURE IRON.
** FOR MORE DETAILS CONTACT FACTORY **
USA/Canada:
Toll Free:
Europe:
[phone]
[phone]
[phone]
Available on Tape and
Reel For Pick and Place
Manufacturing.
100200P4Z50-2 (097) Rev A