XDL21-6-117 Datasheet, PDF (1/3 Pages) Anaren Microwave – Available in Tape & Reel

Model XDL21-6-117
Rev C
Delay Line
DESCRIPTION
The XDL21-6-117 is a surface mount delay line that uses a slow wave
coupling structure that maximizes the amount of delay per unit area over
other distributed delay structures. The XDL21-6-117 can be used in
amplifier linearization applications from 2110 – 2170MHz. The XDL21-6-
117 is ideal for use in the main loop of feed forward and in pre-distortion
amplifiers. The Xinger® delay lines are a low cost, high quality alternative to
the traditional coaxial and filter solutions presently available. Parts have
been subjected to rigorous qualification testing and units are 100% tested.
Features:
• UMTS Band
• Production Friendly
• Consistent Delay
• Stable over Temperature
• Surface Mountable
• Available in Tape & Reel
• Lead-Free Finish
• 100% Tested
OUTLINE DRAWING
ELECTRICAL SPECIFICATIONS
Frequency (MHz)
Mean Delay (nS)
Deviation from Linear Phase (Degrees Max)
2110-2170
UMTS Band
11.7 ± 0.25
± 1.0
Amplitude Flatness (dB p-p)
0.20
Return Loss (dB min)
20
Insertion Loss (dB/nS)
0.60
Power Handling (Watts)
1
ΘJC (°C/watts)
2.0
Operating Temp. (°C)
-55 to +85
Specification based on performance of unit properly installed on microstrip printed circuit boards with
50Ω nominal impedance. Specifications subject to change without notice.
Top View (Near-side)
1.000±.010
[25.40±0.25]
Hot
Via
Side View
.090±.009
[2.28±0.23]
R.055
.047±.004
[1.19±0.10]
.062±.004
[1.57±0.10]
Hot Via
.047±.004
[1.19±0.10]
GND
1.000±.010
[25.40±0.25]
GND
.871±.004
[22.13±0.10]
Orientation
Denotes
Marker Denotes Array Number
Pin Location
Dimensions are in Inches [Millimeters]
XDL21-6-117 Mechanical Outline
2X.070±.004SQ
[1.78±0.10]
Pin 2
.848±.004
[21.54±0.10]
2X .037±.004
[0.94±0.10]
Pin 1
Tolerances are Non-Cumulative
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada: _[phone]
Toll Free: _[phone]
Europe: [phone]