XDL20-11-180S Datasheet, PDF (1/3 Pages) Anaren Microwave – Production Friendly

Model XDL20-11-180S
Rev. A
Delay Line
DESCRIPTION
__________
The XDL20-11-180S is a surface mount delay line that uses a slow wave
coupling structure that maximizes the amount of delay per unit area over
other distributed delay structures. The XDL20-11-180S can be used in
amplifier linearization applications from 869–894 MHz. The XDL20-11-180S
is ideal for use in the main loop of feed forward and in pre-distortion
amplifiers. The Xinger® delay lines are a low cost, high quality alternative to
the traditional coaxial and filter solutions presently available. Parts have
been subjected to rigorous qualification testing and units are 100% tested.
Produced with 6 of 6 RoHS compliant tin immersion.
Features:
• Production Friendly
• Consistent Delay
• Stable over Temperature
• Surface Mountable
• Available in Tape & Reel
• Non-Lead Solder Paste
Compatible
• 100% Tested
• Lead Free
ELECTRICAL SPECIFICATIONS
Frequency (MHz.)
Mean Delay (nS)
Deviation from Linear
Phase (Degrees Max)
Amplitude Flatness
(dB p-p)
Return Loss (dB min)
Insertion Loss (dB/nS)
Insertion Phase (Degrees)
Power Handling (Watts)
869-894
AMPS Band
11.25 ± 0.20
± 0.50
0.15
20
0.40
-10±30.0
1
ΘJC (°C/watts)
4.5
Mechanical Outline
Operating Temp. (°C)
-55 to +85
Specification based on performance of unit properly installed on microstrip printed circuit boards with 50 Ω
nominal impedance. Specifications subject to change without notice.
TOP VIEW (NEAR-SIDE)
SIDE VIEW
BOTTOM VIEW (FAR-SIDE)
1.000±.010
[25.40±0.25]
HOT VIA
.176±.035
[4.48±0.89]
2X .408±.004
[10.37±0.10]
2X .045±.004
[1.15±0.10]
.081±.004
[2.05±0.10]
3X HOT
VIA
2X .045±.004
[1.15±0.10]
ORIENTATION
MARKER
DENOTES PIN 1
DENOTES ARRAY
NUMBER
1.000±.010
[25.40±0.25]
.013±.004
[0.32±0.10]
.873±.004
[22.17±0.10]
R.041
[R1.05]
2X R.055
[R1.38]
2X .070±.004 SQ
[1.78±0.10]
GND
Dimensions are in Inches [Millimeters]
XDL20-11-180S Mechanical Outline
5X .037±.004
[0.94±0.10]
PIN 2
GND
.848±.004
[21.54±0.10]
Tolerances are Non-Cumulative
PIN 1
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada: _[phone]
Toll Free: _[phone]
Europe: [phone]