XDL15-2-020S Datasheet, PDF (1/5 Pages) Anaren Microwave – Delay Line

Model XDL15-2-020S
Rev B
Delay Line
DESCRIPTION
The XDL15-2-020S can be used in amplifier linearization applications from
0.3 – 2.7 GHz. Small form factor of XDL15-2-020S is ideal for cascading to
obtain longer delay. The Xinger® delay lines are a low cost, high quality
alternative to the traditional coaxial and filter solutions presently available.
Parts have been subjected to rigorous qualification testing and units are
100% tested. Produced with 6 of 6 RoHS compliant tin immersion finish.
ELECTRICAL SPECIFICATIONS*
Features:
 Production Friendly
 Consistent Delay
 Stable Over Temperature
 Surface Mountable
 Available in Tape & Reel
 Non-Lead Solder Paste Compatible
 Lead Free
 100% Tested
Frequency
(MHz.)
300 -2000
2000-2700
Return Loss
(dB)
(min)
-17
Insertion Loss per ns
(dB/ns)
-0.9
-14
-1.1
Group Delay (nS)
2.01 ± 0.17
2.20 ± 0.20
* Specification based on performance of unit properly installed on Anaren Test Board 66111-0001.
* Specifications subject to change without notice. Refer to parameter definitions for details.
Mechanical Outline
PIN 1
.400±.010
[10.16±0.25]
ORIENTATION MARK
NC
DENOTES PIN 1
.200±.010
[5.08±0.25]
.066±.013
[1.66±0.34]
NC
2X .034±.004
[0.85±0.10]
2X .024±.004
[0.61±0.10]
2X .020±.004
[0.51±0.10]
PIN 1
2X .024±.004
[0.61±0.10]
.120±.004
[3.05±0.10]
PIN 2
GND
DENOTES
ARRAY NUMBER
NC
Dimensions are in Inches [Millimeters]
XDL15-2-020S Mechanical Outline
NC
2X .034±.004 SQ
[0.86±0.10]
Tolerances are Non-Cumulative
PIN 2
Available on Tape
and Reel For Pick and
Place Manufacturing.
USA/Canada: _[phone]
Toll Free: _[phone]
Europe: [phone]